Samsung M-ER290 specifications Programming PLU Status

Programming PLU Status

1.Turn the control lock to the PGM position.

2.Enter the number of the PLU you wish to program (1-200), press the PLU key.

3.Decide if you want a negative, enforced non-add entry, or disabled PLU. If you do not want any of these options, enter 0. If you wish to select any of these options, complete the table below by adding the status digits for each option. Enter the resulting digit.

PLU is Negative	Yes = 1	+
	No = 0
Enforce Non-Add	Yes = 2	+
Entry	No = 0
PLU is Disabled	Yes = 4	+
	No = 0
		=

4.Decide if you want a preset or single item PLU. If you do not want any of these options, enter 0. If you wish to select any of these options, complete the table below by adding the status digits for each option. Enter the resulting digit.

PLU is Preset	Yes = 1	+
	No = 0
PLU is Single Item	Yes = 2	+
	No = 0
		=

5.Complete the tax status table below by adding the status digits for each tax. Then enter the resulting tax status code.

Taxable by Rate 1?	Yes = 1	+
	No = 0
Taxable by Rate 2?	Yes = 2	+
	No = 0
Taxable by Rate 3?	Yes = 4	+
	No = 0
Taxable by Rate 4?	Yes = 8	+
	No = 0
		=

6.Repeat steps 2 through 5 for each PLU you wish to program.

7.Press the CASH/TEND key to end programming.

62 • Advanced Programming Instructions ER-290 Electronic Cash Register