Listening from an Audio Component
By connecting an audio component having
Using an audio cord
1 Connect an audio component.
to AUDIO
LINE SELECT
Audio cord
(mini jack, not supplied)
Stereo component
2 Set the LINE SELECT switch to OUT.
Tip
When the audio component supports Dolby Surround (Pro Logic), select [Dolby Surround] in [DOWNMIX] under [AUDIO SETUP]. Otherwise, select [NORMAL] ( page 43).
Using an optical digital cord
1 Connect a digital audio component.
to AUDIO
LINE SELECT
Optical digital cord (not supplied)
Digital audio
component
to optical digital input
2 Set the LINE SELECT switch to OUT.
Tips
•When the audio component supports Dolby Surround (Pro Logic), select [Dolby Surround] in [DOWNMIX] under [AUDIO SETUP]. Otherwise, select [NORMAL] ( page 43).
•When connecting an amplifier having a
•When connecting an amplifier having a
OUT SETUP] under [AUDIO SETUP] ( page 43).
Viewi
Playe
Comp
You can in component need a plug jack. Refer with the co
1 Conne
Plug ada not supp
to VID
2 Set the
48