Disney DT1900-P manual Setting Language, TV Operation, Direct Channel Selection buttons

SETTING LANGUAGE

This TV can display the on-screen language in English, Spanish or French. Select the language you prefer first, then proceed with the other menu options.

1

2

Press the MENU button.

Press the or button to select “LANGUAGE”, then press the button.

3	Press the	or	button
	to select the desired language:
	English (ENGLISH), Spanish
	(ESPAÑOL) or French
	(FRANCAIS).
	Press the MENU button to return to normal TV viewing.
4

ENGLISH

NOTE:

If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not be affected by the language selection.

TV OPERATION

1	To turn on the TV, press the POWER button.
2	The VOLUME can be adjusted to a desired level by
	pressing the + or – (VOLUME) button.

The sound level will be indicated on the TV screen by the character.

3 Set the TV/CABLE menu option to the appropriate position. When shipped from the factory, this menu option is in the CABLE setting. See “TO MEMORIZE CHANNELS”.

	TV	-	VHF/UHF channels
	CABLE	-	CABLE TV channels
4	(CHANNEL)			and	buttons

Press and release the (CHANNEL) or button. The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly.

For proper operation, before selecting channels, they should be set into the TV's memory.

See “TO MEMORIZE CHANNELS”.

Direct Channel Selection buttons (0-9)

Press these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the original channel.

TV Mode Direct Channel Selection

When the TV/CABLE menu option is in the TV position, all channels can be instantly selected by using two buttons (For example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.

CABLE TV Mode Direct Channel Selection

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

CH. 1-9 Press “0” twice, then 1-9 as needed. Example, to select channel 2, press “002”.

CH. 10-12 Press “0”, then remaining 2 digits. Example, to select channel 12, press “012”.

CH. 13-99 Press the 2 digits in order.

Example, to select channel 36, press “36”.

CH. 100-125 Press the 3 digits in order.

Example, to select channel 120, press “120”.

NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.

7