.
XFER
# # (UPDATE)
Individual updates per DAC
(Two Channels)
XFER
# # (UPDATE)
Simultaneous updates from all DACs Jumpered to XFER
INDIVIDUAL UPDATE / SIMULTANEOUS TRANSFER JUMPER
J1 to J8 - One per pair of channels.
Figure 3-3. Simultaneous Update Jumper
3.5 Analog Output Range Switches
The analog output voltage range of each channel can be set with a set of five ganged DIP switches. The switch blocks are located on the board below the calibration potentiometers. The switch blocks are labeled 0 to 15 (0 to 7 on the
Set the switches for each individual channel as shown in Figure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| |
RANGE |
|
|
|
|
|
|
|
|
|
|
|
| UP | DN | UP | DN | DN | ||||||
| UP | DN | DN | UP | DN | ||||||
| UP | DN | DN | DN | UP | ||||||
0 to 10V |
| DN | UP | UP | DN | DN | |||||
0 to 5V |
| DN | UP | DN | UP | DN | |||||
0 to 2.5V |
| DN | UP | DN | DN | UP |
Figure 3-4. Output Range Switch
5