Omega Engineering CIO-DAC08 user manual Connector Diagram, Connector CIO-DAC16

3.10 Connector Diagram

The CIO-DAC## connector is a 37-pin D-type connector accessible from the rear of the PC through the expansion backplate.

The connector accepts female 37-pin D type connectors, such as those on the C37FF-2, 2 foot cable with connectors.

If frequent changes to signal connections or signal conditioning is required, refer to the information on the CIO-TERMINAL, CIO-SPADE50 and CIO-MINI37 screw terminal boards.

-12V 19
GND 18		37	GND
+12V 17		36	+5V
D/A 15 OUT 16		35	LLGND
D/A 14 OUT 15
		34	LLGND
D/A 13 OUT 14
		33	LLGND
D/A 12 OUT 13
		32	LLGND
D/A 11 OUT 12
		31	LLGND
D/A 10 OUT 11		30	LLGND
D/A 9 OUT 10		29	LLGND
D/A 8 OUT	9
		28	LLGND
D/A 7 OUT	8
		27	LLGND
D/A 6 OUT	7
		26	LLGND
D/A 5 OUT	6	25	LLGND
D/A 4 OUT	5	24	LLGND
D/A 3 OUT	4	23	LLGND
D/A 2 OUT	3	22	LLGND
D/A 1 OUT	2	21	LLGND
D/A 0 OUT	1	20	LLGND

Figure 3-5.. Connector CIO-DAC16 Figure 3-6. Connector CIO-DAC08

8