Sanus Systems VMCC1 manual Add Bar Brackets, Diagram, Add Support bar, English

Step 3: Add Bar Brackets

Slide the lower Cross Tube through the Bar Bracket (e), the Axis Assembly, a second Bar Bracket and through the second Monitor Brack- et. Tighten all three Vise Assemblies secure the Cross Tube once it is slid through the second Monitor Bracket. See Diagram 3 below.

Diagram 3

ENGLISH

monitor bracket

monitor bracket

e

axis assembly

cross tube e

Step 4: Add Support bar

Slide the Support Bar (g) through the Bar Bracket (e), Axis Bracket (d) and through the other Bar Bracket. Make sure the Support Bar is centered on the wall mount. Thread each 1/4 - 20 x 5/8 Bolt (k) through each hole in the bottom of the Axis Bracket until they bottom out in the Support bar. See Diagram 4 below.

Diagram 4 Detailed View

g

d

e

e

k

VMCC1ins_010606_ML.indd 5 1/16/06 10:31:55 AM