Sanus Systems manual Add center channel to VMCC1, English, See for depth adjustment of speaker

ENGLISH

Step 13: Add center channel to VMCC1

Slide the Bar Brackets (e) until the Speaker Brackets (f) line up with the threaded inserts on the back of the speaker. Select the proper bolt for your center channel speaker by hand threading the M4 x 10 Bolt (h), M5 x 10 Bolt (i) or 1/4 - 20 x 3/8 Bolt (j) into the into the threaded inserts in the back of the speaker to determine which fits. Once you have selected the proper bolt, insert it through each of the Speaker Brackets and thread it into the center channel. Tighten each Bolt with a Phillips screw driver. See Diagram 13 below.

You can now center the speaker with the TV by sliding it left or right. Once it is positioned, tighten the 1/4 - 20 x 5/8 Bolt (k), installed in Step 6, until it bottoms out against the Support Bar.

To adjust the vertical placement of the speaker, loosen the 1/4 - 20 x 3/8 Bolts connecting the Upper and Lower Extension arms and reposition the arms until center channel is at desired position.

See Step 5 for depth adjustment of speaker.

Diagram 13

speaker

f

j

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11.16.05

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

VMCC1ins_010606_ML.indd 10 1/16/06 10:32:08 AM