Troubleshooting

Problem	Tip
No image or wrong •		Make sure video sources are
image on TV1	•	connected to the transmitter (A).
		Make sure the transmitter (A) is
	•	connected to TV1.
		Make sure SCART cables are
	•	firmly inserted.
		Make sure the video source is
	•	switched on.
		Make sure the correct SCART
	•	input on TV1 is selected.
		Select the correct video source
		with TV1 source. See page 8.

No image or wrong •		Make sure SCART cables are
image on TV2	•	firmly inserted.
		Make sure the receiver (B) is
	•	connected to TV2.
		Make sure both receiver (B) and
	•	transmitter (A) are switched on.
		Make sure the video source is
	•	switched on.
		Make sure the correct SCART
	•	input on TV2 is selected.
		Select the correct video source
	•	with +/- on the receiver (B).
		If the video source gives proper
		image on TV1:
		Make sure the video source gives
		video signal in CVBS mode. See
	•	its user manual
		Change the wireless channel that
		is used for communication. See
	•	page 7.
		The receiver (B) is out of range
		of the transmitter (A). The num-

ber of walls and ceilings in between the receiver (B) and transmitter (A) restrict the dis- tance.