PYLE Audio SLV5400 Interference, Image on TV2, Restrict the distance, Video sources, From TV2

Interference in the •

Slightly change the position of the

image on TV2

•

receiver (B) or the transmitter (A).

Change the wireless channel that

is used for communication. See

•

page 7.

The receiver (B) is out of range of

the transmitter (A). The number

of walls and ceilings in between

the receiver (B) and transmitter

(A) restrict the distance.

The video sources •

Point the remote control directly

do not respond to

•

to the receiver (B).

the remote con-

Replace the batteries of the

trol commands

•

remote controls with new ones.

from TV2

Install the remote control blaster

•

cord (G). See page 6.

The maximum operating distance

of the remote control is 5 m.

The image of the

•

Turn off the auto standby mode

video source dis-

of the video source. See its user

appears on TV2

•

manual.

Follow the instructions to recon-

nect the video sources. See the

quick start guide.

Buzzing sound

•

Slightly change the position of the

when you use the

receiver or the transmitter until

remote control.

•

the buzzing sound stops.

Sometimes it is not possible to

solve the problem.

Black and white

•

Check if the SCART connector of

image with S-VHS

the S-VHS VCR gives signal in

VCR.

CVBS. See its user manual.

Cannot record a

•

Check if you used full-wired

DVD or video

•

SCART cables.

tape.

DVD or video tape is copyright

protected.