PYLE Audio SLV5400 user manual Installation, Install the remote control blaster cord

Page 6

Installation

STANDBY

SELECT

For basic installation, see the quick start guide that came with your Wireless TV Link.

SLV5400WIRELESSTV LINK TRANSMITTER

SELECT

STANDBY

SLV5400WIRELESSTV LINK TRANSMITTER

WIRELESS TV LINK RECEIVER

2Connect the remote control blaster cord (G) to the IR port.

3Position the blaster light in front of the video source.

See the user manual of the video source for the exact location of the IR sensor on the front panel.

4Switch on the transmitter (A).

5Take the remote control of a video source with you.

6Go to TV2.

7Switch on TV2.

8Switch on the receiver (B).

9Select the correct SCART input on TV2.

10Operate the video source with its remote control.

11If necessary, repeat the steps 3 to 10 for the other video sources.

Image 6

Contents Wireless TV Link Wireless TV Link Receiver Contents Control and display elements Remote control Remote control blaster cordOverview TransmitterYour Wireless TV Link SafetyDo not cover the product Installation Install the remote control blaster cordSwitch off the transmitter a Operation Enjoy your Wireless TV LinkGo to TV2 Switch on TV2 Switch on the receiver B Remove interference on TV2Watch a video source on TV1 Either automatic Operate TV1 and the video source as usualSound through your audio amplifier Use additional featuresUse VCR/DVD recorder features Select a video source with SelectTroubleshooting Remote control Buzzing sound stops Remote con Replace the batteries Trol commandsRemote control is 5 m Solve the problemInformation Health and safetyMaintenance and service Recycling and disposalWarranty One year limited warrantyGlossary EC Declaration of Conformity Need help?