Controlling the module via LAN Control
This module can be controlled by connecting a personal computer via this module’s Ethernet port.
NOTE: This LAN control can not control the LCD monitor.
1. Connection
First turn off the power of the LCD monitor and the computer, then make connection with LAN cable.
NOTE: Use a category 5 or higher LAN cable.
2. Network Setting
Set the IP address of the module on the “Network Settings” OSD menu.
NOTE: Refer to the “OSD Controls” - “Network Settings” section of this manual for the IP address setting.
3.Operation
1)Access is gained to the HTTP server function by starting the Web browser on the computer via the network connected to the module, then entering the following URL.
Display Area
http://<the module’s IP address>
Example: When the IP address of the module is “192.168.0.1”, the URL is http://192.168.0.1
2) Click the button on the control panel of the computer to execute the function or the setting.
NOTE: Refer to the “Basic Operation” section of this manual for the function.
Example 1: Direct Channel Setting Clicking numeric buttons
Example 2: Current Channel Read
Clicking the [CURRENT CHANNEL] button will display the current channel number to the Display Area.