Mitsubishi Electronics DX-TL4509E(Z) Unplug the Power Cord During a Long Absence

Page 2

Caution and care

HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)

NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT

Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage.

PROTECT THE POWER CORD

Damage to the power cord may cause fire or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and carefully unplug the cord by holding the main plug.

If this unit is moved with the power on status, the built-in HDD may be damaged. Confirm that more than one minute have passed since the power cord and the connecting cords were disconnected, then move this unit. Make sure to take the disc out and close the disc loading slot.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the power and unplug the power cord during a long absence.

MAINTAIN GOOD VENTILATION

Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place the unit on a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the unit.

WHEN NOT IN USE

When not in use, always eject the disc and turn OFF the MAIN switch.

CABINET CARE

Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry. PVC cables or leads should not be left in contact with the cabinet surface for long periods.

INSTALLATION LOCATION

For excellent performance and lasting reliability install in a location that is:-

1.Well ventilated, out of direct sunlight and away from direct heat.

2.A solid vibration-free surface.

3.Free from high humidity, excessive dust and away from magnetic fields.

4.Please ensure that the ventilation fan located on the unit’s back panel is not blocked.

UNSUITABLE LOCATIONS

Placing the unit in the following places might shorten the product life:

Extremely cold places, such as refrigerated warehouses and ice houses

Places where excessive hydrogen sulfide is likely to be generated, such as hot-springs areas

Places or locations with salt air environment.

THIS EQUIPMENT DOES NOT PROVIDE CONNECTION FOR USED WITH OUTDOOR OR CABLE DISTRIBUTION SYSTEMS.

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT PLACE HEAVY OBJECT ON THIS UNIT.

DO NOT STEP ONTO THIS UNIT.

DO NOT PLACE ANY OBJECTS IN FRONT OF THE DISC LOADING SLOT.

The unit may drop or fall by losing its balance. It may cause injury or failure of the unit.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. THIS APPARATUS MUST BE GROUNDED.

MAINS LEAD CONNECTION

The mains lead on this Unit is fitted with a non-rewireable mains plug, incorporating a 5A fuse. If you need to replace the fuse, use a 5A fuse approved by BSI or ASTA to BS 1362, ensuring you refit the fuse cover. If the mains plug is not suitable for the sockets in your home, and you require to remove the plug, remove the fuse, cut off the plug then dispose of the plug immediately, to avoid a possible electric shock hazard. To refit a new plug, follow these instructions; Green- and-yellow: Earth, Blue: Neutral and Brown: Live. As the colours in the mains lead of this Unit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

This unit complies with the requirements of the EC Directive 89/336/EEC, “EMC Directive” and 73/23/EEC, “Low Voltage Directive”, as amended by Directive 93/68/EEC. The requirements for the susceptibility according to EN 55024 and the requirements for interference according to EN 55022 are observed for the operation on residential areas, business, light industrial premises and in small scale enterprises, inside as well as outside of the building. All places of operation are characterised by their connection to the public low voltage power supply system. This unit is manufactured in accordance with EN 60950-1.

2

Image 2
Contents DX-TL4509E DX-TL4509EZ Unplug the Power Cord During a Long Absence Recordable time and product warranty EnglishDisclaimer Contents Page Software License Agreement Setting the menu using a mouse How to set the menusSetting the menus Setting the menu using the front panel buttonsSelecting an item Displaying a menu screenClosing a menu screen Using a mouse Setting parametersUsing the front buttons of the unit Inputting numbersSymbols in the menus Right buttonSetting the time and date Time/Date SettingMultiplexer buttons Using the basic multiplexer functionsBasic multiplexer functions Controlling the camera PTZ control using the menuPTZ control using the front panel buttons Recording the picture manually Basic manual recordingTo change the playback device Playing back the recorded dataBasic playback Search by Time and Date Searching the desired pictureBasic search Search by Alarm List Searching the desired pictureCopying the recorded data Copy Data to Copy 1 Drive/Set Copy 1 DriveCopying the recorded data Copy Data to Copy 2 Drive/Set Copy 2 DriveCopying the data of this unit to a video cassette Starting up the application software Playback softwareSystem requirements Operational panelOperation menu File menuSearch menu Bookmark menuCommunications by Web Browser LoginCommunications by Web Browser Personal computer product requirementsMain Menu Communications by Web Browser Live MonitoringPlayback Time SearchImage Search Alarm List SearchConfiguration Menu User Registration Mail Setup Recorder Title & Camera TitlesEnglish Access Mode Setup Clock SetupLogout Change Login User Troubleshooting Installation RecordingTroubleshooting Countermeasure Cancelling HDDLOG13 872C423A1