Mitsubishi Electronics DX-TL4509E(Z) instruction manual Countermeasure Cancelling, Hdd

Warnings and CALL OUT output

Warnings and their appropriate countermeasures

#1 Options in the CALL OUT output column:

•Selectable: Selects to output CALL OUT signal or not on the menu screen.

•Fixed: Outputs CALL OUT signal from the CALL OUT terminal regardless of the menu setting.

•None: Does not output CALL OUT signal, but displays a warning on the screen.

The warning display appears when the HELP button is pressed during “ALERT” is displayed on the screen. The contents

of last 16 warnings are stored and can be displayed. The contents older than them are cleared and output of CALL OUT is cancelled. CALL OUT signal output can be stopped by pressing the E button or clicking “Clear Warning” while displaying the warning display.

Warning Display	Countermeasure	Cancelling	Log number		CALL OUT
					output
		the warning		#1
The remaining capacity of Normal Area	• Copy data as necessary.	Click "Clear	LOG1200		Selectable
in Main device has become less than **%.#2		Warning" or
The remaining capacity of Alarm Area		press the E	LOG1201
in Main device has become less than **%.#2		button.
The remaining capacity of LPA Area			LOG1202
in Main device has become less than **%.#2
The remaining capacity of Copy 2 disk			LOG7200
has become less than **%.#2
The remaining capacity of Normal Area	• When the warning is cancelled,	Click "Clear	LOG1100#3		Selectable
in Main device has become 0%.	the unit starts overwriting the	Warning" or	LOG4100#4		None
The remaining capacity of Alarm Area	oldest data remaining in the	press the E	LOG1101#3		Selectable
in Main device has become 0%.	HDD.	button.	LOG4101#4		None
The remaining capacity of LPA Area	• Copy data as necessary.		LOG1102		Selectable
in Main device has become 0%.
The remaining capacity of disc in Copy 1	• Replace media if necessary.	Click "Clear	LOG3100		None
drive has become 0%.		Warning" or
The remaining capacity of disc in Copy 2		press the E	LOG7100		Selectable
drive has become 0%.		button.
Copy data size error.	• Set the copy/restore range again.	Click "Clear	LOG3701#5		None
	• Replace with new media.	Warning" or	LOG7701#6
Check the range of copy data or the disk space		press the E	LOG4701#4
of copy media.		button.
Copy media error.	• Check that media is in the	Click "Clear	LOG3702#5		None
	recording device. (If not, insert	Warning" or	LOG7702#6
Cannot copy the data.	the media.)	press the E	LOG4702#4
Check the copy device.	• Check whether that the write-protect	button.
	of the media is enabled. Is so,
	cancel the protection.
	• After turning off the power of the
	peripheral recording device and
	the unit, reboot in order of
	peripheral recording device and
	the unit.
	• After turning off the power of the
	peripheral recording device and
	the unit, check a cable.
No disk.	• Insert the disc.	Click "Clear	LOG3703#5		None
		Warning" or	LOG7703#6
The drive has no disk or wrong type of disk.		press the E	LOG4703#4
Put a proper disk into the drive.		button.
The remaining capacity of disc in Copy 1	• Replace the disc.	Click "Clear	LOG3704#5		None
drive has become 0%.		Warning" or
Put a new disk into the drive.		press the E
The remaining capacity of disc in Copy 2		button.	LOG7704#6
drive has become 0%.
Put a new disk into the drive.

#2 : The value depends on the setting.

#3 : Log number for recording

#4 : Log number for restore

#5 : Log number for copy 1

#6 : Log number for copy 2

#7 : (The following numbers are entered in) 01 : CH 1 02 : CH 2 03 : CH 3 04 : CH 4

05 : CH 5 06 : CH 6 07 : CH 7 08 : CH 8

09 : CH 9

#8 : 13	,14	: Recording	23	,24	: Playback
33	,34	: Copy 1	43	,44	: Restore
73	,74	: Copy 2
(The following numbers are entered in					)
00	: A (Internal) 01 : B (Internal)
10 to 25 : USB (External)

36