Mitsubishi Electronics DX-TL4509E(Z) Recorder Title & Camera Titles, Mail Setup

Communications by Web Browser (continued)

Recorder Title & Camera Titles

This is the screen for setting or changing the recorder and the camera titles.

step1. Select “Recorder Title & Camera Titles” and left- click.

•The “[Recorder Title & Camera Titles]” screen appears.

E-mail Setup

This is the screen for setting the information related to the e-mail server or sender, and for setting the e-mail address of the receiver.

step1. Select “E-mail Setup” and left-click.

• The “[E-mail Setup]” screen appears.

step2. Enter the desired recorder or camera title to “New Text.”

•The recorder and the camera titles currently set are shown in the “Current Text.”

step3. Select “change” and left-click.

step2. (When making the settings to send the e-mail • • •)

Input the desired settings for “SMTP Server (Host Name or IP),” “POP Server (Host Name or IP),” “POP User ID,” “POP User Password,” “DNS Server 1 Address,” “DNS Server 2 Address,” “From:,” and “Recorder ID.”

•The settings currently set are shown in the “Current Settings.”

The maximum number of characters that can be used to set the e-mail address is 49.

step3. To send the test e-mail, select “From Address Test (send test mail)” and left-click.

step4. (When attaching alarm recording picture to e-mail •

• •)

Put a check mark on “Picture” checkbox.

•E-mail with the picture which is captured during alarm recording is sent to the marked user. The file extension of the picture data file which is attached to e-mail is “.aap”.

•“Delay time to attachment” is used to determine the timing of capturing the picture to be attached. The time period between occurrence of alarm and capture of the picture can be set up to 10 seconds.

You cannot send the picture when the alarm recording is not performed.

The picture to be attached is captured during alarm recording of which trigger is input of the rear terminal.

To perform this function, put a check mark on “Sensor.”

When the multiple notifications are occurred at the same time, notification may be delayed or not all the items may be notified.

When the alarm recording time is shorter than the specified delay time, the picture cannot be attached.

When the multiple alarm signals are input at the same time, only the picture from the camera corresponding to the lowest sensor number is attached.

30