Mitsubishi Electronics LT-52246 Cable Box or Satellite Receiver Only Connect, Main, Incoming from

223. TV Connections

HDTV Cable Box or Satellite Receiver, DVD Player, or Other Device with Component Video

If your cable box or satellite receiver has an HDMI output, use the connections for HDMI devices described on this page.

Required: RCA component video cables, left/right analog stereo audio cables.

1.	Connect RCA-type cables from the Y Pb Pr outputs
	on the device to the Y Pb Pr inputs on the TV main
	panel, matching the colored green, blue, and red
	connections.
2.	Connect left (white) and right (red) audio cables

HDMI

4

3

2

1

IR- NetCommand	S-VIDEO
Output / External
Controller Input

Y / VIDEO

INPUT1

Pr)i0 80 1/

p0 27 Pb/ p80 4/

( 84 i0

L

AUDIO

R

2.

1.

from the device to AUDIO L and R on the TV main

panel.

3. Cable Box or Satellite Receiver Only: Connect

the cable from the outside cable or satellite service

to CABLE IN or SATELLITE IN on the cable box or

satellite receiver. See your device’s owner’s guide

for instructions and cable compatibility.

Note: To hear digital surround sound, connect the digital audio output from the device directly to your digital A/V receiver.

Figure 1. Connecting a device with component video outputs

INPUT3
	Pr80i)
VIDEO	0p / 10	TV
	/i
L	Pbp/72
AUDIO	480
	0	main
R	(48
DVI/PC Y	Y/VIDEO	panel
L	L
AUDIO	AUDIO	2.	1.
	DIGITAL
R	R
INPUT2	INPUT1
	AUDIO
	OUTPUT

LR

AVR AUDIO OUTPUT

ANT2/AUX	ANT1/MAIN	L	R	Y	Pb	Pr
		AUDIO

3.	CABLE IN or
Incoming from
	SATELLITE IN
cable service or
satellite dish

HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device)

Required: HDMI-to-HDMI cable.

Connect an HDMI cable from the TV main panel to the HDMI device output. HDMI devices provide video and audio through the single cable.

Mitsubishi recommends you use category 2 (high- speed) HDMI cables to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color. See “HDMI Cable Categories,” page 10, for more on HDMI cable types.

IMPORTANT

HDMI and Audio Signals

Digital Surround Sound: The TV’s HDMI inputs can receive digital stereo audio signals only. To hear digital surround sound from an HDMI device, connect the device’s HDMI or digital audio output directly to your A/V receiver. See the Owner’s Guides for those devices for instructions.

HDMI

	4
	3
	2
	1
IR- NetCommand		S-VIDEO
Output / External
Controller Input
INPUT3
		Pr080i)
VIDEO		20p / 1	Any HDMI
		8
L		Pbp/7
AUDIO	Y	0i /804	device
DVI/PC		Y / VIDEO
R		4 (
L		L
AUDIO		AUDIO
R		R
	INPUT2	INPUT1
		DIGITAL
		AUDIO
		OUTPUT	R	L
L	R
AVR AUDIO
OUTPUT			AUDIO
ANT2/AUX	ANT1/MAIN		TV main

panel

Figure 2. Connecting an HDMI device.

Note: HDMI inputs are certified for proper interoperability with other products certified by Simplay™.