Arcam Comprehensive Guide to AVR350 Features and CR100 Remote Control

Page 19

CR100 Universal remote control

The CR100 is a ‘universal’ remote that controls the AVR350 and up to

 

Device selection

seven other devices. The instructions on this page only refer to the

IMPORTANT: Press the ‘AMP’ button first to

control of the Arcam AVR350.

operate the AVR350.

For information on using the remote control for other devices, and a

 

full list of its features, see the Handbook supplied with the CR100.

 

English

On/Stand-by

This allows the AVR350 to be put into and taken out of stand-by remotely.

If you do not wish to put Zone 2 into stand-by at the same time as the main zone, press and hold the stand-by button on the remote control for more than 3 seconds.

TAPE

Selects Tape input for the amplifier

Navigation buttons

Arrow buttons allow navigation around the Basic and Advanced Set-up menus on the AVR350.

Confirm a selection by pressing OK.

ShifT B to Power on

Shift C to Power off

Shift E to switch Zone 2 on

Shift D to switch Zone 2 off.

MODE

Cycles through available audio surround modes.

MUTE

Press once to mute the main system. Press again (or use VOL +/–) to un-mute.

VOLUME +/–

Adjusts the sound output.

AVR-specific controls

These buttons are described on the next page.

 

 

 

 

 

 

��

����

�������

���

 

 

 

��

�����

���

���

���

���

��

���

 

 

���

���

���

��

����

 

 

����

 

 

����

 

 

 

 

��

������

��

���

��

���

����

���

����

 

 

 

����

�������

������

�����

����

�����

�����

�����

����

Source selection only

1

DVD input

2

CD player input

3

Television (sound) input

4

Auxiliary (line) input

5

Video Cassette Recorder input

6

Satellite decoder input

7

DAB/FM/AM tuner input

Press the relevant button once to select input.

Source selection and handset configuration

DVD

DVD input/DVD commands

SAT

Satellite decoder input/SAT commands

av

Television (sound) input/AV commands

tun

Radio tuner input/TUN commands

amp

Amplifier. Press first to operate the AVR350

aux

Auxiliary (line) input/AUX commands

vcr

Video Cassette Recorder input/VCR

 

commands

cD

CD player input/CD commands

Press the relevant button once to select input and reconfigure the handset. Press and hold to select the input without reconfiguring the remote.

MENU

Press to select the OSD Main menu.

Press and hold for more than three seconds to select the ‘Set-up Menu Index’.

DISP (Display)

Press to cycle through Off/Dim/Bright illumination of the front panel display

0 /

If the tuner is in Preset mode, these buttons give the next Preset radio station down (0) or up (/). If the tuner is in Tune mode, these buttons decrease/increase the tuning frequency.

NOTE

 

 

Remember to install the four AAA batteries supplied

 

 

 

AVR350

before trying to use your remote control.

 

19

 

 

 

Image 19
Contents Arcam AVR350 surround sound receiver Important safety instructions Safety guidelinesSafety compliance Contents Introduction Using this handbookSafety Before you startBefore making connections Using the remote controlCables InstallationPositioning the unit AVR350 rear panelConnection of record decks Audio connectionsAnalogue audio connections Analogue pre-amplifier outputsVideo connections Scart RGB 4-wire connectionUsing spade terminals Connecting loudspeakersSpeaker impedance AM antenna Connecting the AM and FM antennasZone 2 connections FM antennaMains lead Connecting to a power supplyControl connections Trigger outputsNavigating the Set-up menu Configuring the AVR350Set-up mode Set-up Menu Index‘Basic’ Set-up Menus General SettingsSpeaker Sizes Subwoofer SettingsBypass the DSP processing Speaker delay settings Speaker Delay SettingsDistance measurements for 5.1 Use Channels 6+7 for Level settingsEX Settings Test Tone CycleADV 1 Speaker Eq ADV 2 Video SettingsADV 3 Digital Settings ‘Advanced’ Set-up MenusADV 6 Hdmi Settings Saving Settings and Exit Set-upADV 4 Zone 2 Settings ADV 5 Analogue SettingsCR100 Universal remote control AVR specific keys CR100 Front panel display Switching on/offVolume control Operating your AVR350Zone HeadphonesInput selection Stereo DirectTreble/Bass Remote control buttonsEffects/FX ModeDeleting a preset Using the tunerTuning to a station Storing a presetUsing the Main Menu No centre spreading 20.8 69.8 Phantom centre Using Zone‘Dimension’ is set to 3 for normal use Display Centre spreading EffectDigital multi-channel sources Surround modesMulti-channel source modes Two-channel source modesFollowing decoding and surround modes are available Mono DSP Effects Modes Speaker positioningBi-amping your system Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Before you start important informationFront Right Front Left Speaker Bi-amping using an external power-amplifierTroubleshooting Hum on an analogue input Source switching changes randomly or freezes on one sourceNo Zone 2 audio when playing DTS film Unable to adjust bass and treble controlsIR Remote Codes Command Command codeSystem code Command Command code Scart RGB cable with audio back to processor Scart connectionsScart S-video cable with audio back to processor Continual improvement policy Technical specificationsRadio interference Worldwide Guarantee GuaranteeOn line registration
Related manuals
Manual 48 pages 25.89 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.