Arcam AVR350 manual Technical specifications, Continual improvement policy, Radio interference

Page 37

Technical specifications

Analogue audio inputs

Line input sensitivity

0.5/1/2/4V rms (2V rms normal)

Overload margin

+2dB

Input impedance

>22kΩ

Analogue audio outputs

 

Level (at 0dB gain)

2V rms

Maximum level

3.5V rms

Impedance

600Ω

Signal/Noise ratio (analogue input)

100dB unweighted (measurement bandwidth 22kHz)

Signal/Noise ratio (digital input)

100dB unweighted (measurement bandwidth 22kHz)

THD+N (analogue input)

90dB (0.003%) (measurement bandwidth 22kHz)

THD+N (digital input)

90dB (0.003%) (measurement bandwidth 22kHz)

Frequency response

20Hz – 20kHz (±0.25dB)

Headphone impedance

390Ω

Power amplifier

 

Continuous power output (4 or 8Ω)

 

any 2 channels driven

120W (20Hz – 20kHz @ 0.2% THD)

all 7 channels driven

100W (1kHz @ 0.2% THD)

THD at 80% rated power output

0.02% (at 1kHz)

Video inputs and outputs

 

Input and output impedance

75Ω

Composite video level

1V

HF response to (-3dB)

12MHz

S-video level (Y/C)

1V/0.28V

HF response to (-3dB)

12MHz

HQ (component) video

 

level (Y/Cr/Cb)

1V/0.5V/0.5V

level (R/G/B)

1V/1V/1V

HF response to (-3dB)

150MHz

Digital audio inputs

 

Coaxial connection (level/impedance)

0.5V/75Ω

Acceptable sampling frequencies

44.1kHz, 48kHz and 96kHz

Digital output level/impedance

0.5V/75Ω

Trigger outputs

 

Output D.C. voltage level

12V ±1V

(excl. RGB status)

 

Allowable load

30mA max. (min. 400Ω)

Remote inputs and output

 

Signal

modulated 36kHz carrier

Coding

Philips RC-5

General

 

Mains voltage

110V and 230V (switchable)

Power consumption (maximum)

1200VA

Dimensions W x D x H (including feet)

433 x 420 x 145mm

Weight (net)

16.2kg

Weight (packed)

21.4kg

Supplied accessories

Mains lead, CR100 remote control, 4 x AAA batteries

E&OE. All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

Radio interference

The AVR350 is a digital audio device which have been designed to very high standards of electromagnetic compatibility.

The unit can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the AVR350 player and its connecting cables as far from the tuner and its aerials as possible. Connecting the AVR350 and the tuner to different mains sockets can also help to reduce interference.

EU COUNTRIES – These products have been designed to comply with directive 89/336/EEC. USA – These products comply with FCC requirements.

English

AVR350

37

Image 37
Contents Arcam AVR350 surround sound receiver Important safety instructions Safety guidelinesSafety compliance Contents Safety Using this handbookBefore you start IntroductionBefore making connections Using the remote controlPositioning the unit InstallationAVR350 rear panel CablesAnalogue audio connections Audio connectionsAnalogue pre-amplifier outputs Connection of record decksVideo connections Scart RGB 4-wire connectionUsing spade terminals Connecting loudspeakersSpeaker impedance Zone 2 connections Connecting the AM and FM antennasFM antenna AM antennaControl connections Connecting to a power supplyTrigger outputs Mains leadSet-up mode Configuring the AVR350Set-up Menu Index Navigating the Set-up menu‘Basic’ Set-up Menus General SettingsSpeaker Sizes Subwoofer SettingsBypass the DSP processing Speaker delay settings Speaker Delay SettingsDistance measurements for 5.1 EX Settings Level settingsTest Tone Cycle Use Channels 6+7 forADV 3 Digital Settings ADV 2 Video Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqADV 4 Zone 2 Settings Saving Settings and Exit Set-upADV 5 Analogue Settings ADV 6 Hdmi SettingsCR100 Universal remote control AVR specific keys CR100 Volume control Switching on/offOperating your AVR350 Front panel displayInput selection HeadphonesStereo Direct ZoneEffects/FX Remote control buttonsMode Treble/BassTuning to a station Using the tunerStoring a preset Deleting a presetUsing the Main Menu ‘Dimension’ is set to 3 for normal use Using ZoneDisplay Centre spreading Effect No centre spreading 20.8 69.8 Phantom centreDigital multi-channel sources Surround modesMulti-channel source modes Two-channel source modesFollowing decoding and surround modes are available Mono DSP Effects Modes Speaker positioningBi-wiring your loudspeakers Bi-wiring and bi-amping loudspeakersBefore you start important information Bi-amping your systemFront Right Front Left Speaker Bi-amping using an external power-amplifierTroubleshooting No Zone 2 audio when playing DTS film Source switching changes randomly or freezes on one sourceUnable to adjust bass and treble controls Hum on an analogue inputIR Remote Codes Command Command codeSystem code Command Command code Scart RGB cable with audio back to processor Scart connectionsScart S-video cable with audio back to processor Continual improvement policy Technical specificationsRadio interference Worldwide Guarantee GuaranteeOn line registration
Related manuals
Manual 48 pages 25.89 Kb

AVR350 specifications

The Arcam AVR350 is a high-performance AV receiver that epitomizes the blend of cutting-edge technology and sophisticated design. Known for its exceptional sound quality and advanced features, it caters to audiophiles and home theater enthusiasts alike. The AVR350 stands out with its robust build quality and user-friendly interface, making it an attractive option for those looking to enhance their home entertainment experience.

One of the key features of the Arcam AVR350 is its 7.1-channel amplification, delivering a powerful audio output of 90 watts per channel. This ensures that every sound in your favorite movies, music, or games is reproduced with clarity and depth. The receiver is equipped with advanced Dolby Digital and DTS decoding technologies, which allow it to support high-definition audio formats. This means users can enjoy a truly immersive surround sound experience, whether it’s the booming effects of an action movie or the delicate nuances of a classical performance.

Another standout characteristic of the AVR350 is its digital signal processing. Incorporating sophisticated algorithms, it optimizes audio performance for different environments, ensuring that listeners achieve the best sound quality no matter the size or shape of the room. The inclusion of Arcam's proprietary room EQ technology further enhances the listening experience by adjusting the sound to compensate for the room acoustics, providing a balanced audio output tailored to individual environments.

Connectivity options are comprehensive, with multiple HDMI inputs and outputs supporting high-definition video formats. The AVR350 also supports a variety of other audio-video inputs, including component and composite video connections, as well as analog audio inputs. This versatility makes it easy to integrate with a range of devices, including Blu-ray players, gaming consoles, and streaming devices.

For users keen on multi-room audio solutions, the AVR350 offers the capability to distribute audio to several zones, allowing you to enjoy different music or media in various parts of the home simultaneously. The intuitive on-screen menu simplifies setup and operation, ensuring that users can easily configure their systems according to their preferences.

In summary, the Arcam AVR350 is a well-rounded AV receiver that combines impressive audio performance, advanced decoding technologies, and flexible connectivity options. Its focus on high-quality sound and user convenience makes it an ideal choice for those looking to elevate their home entertainment systems. With the AVR350, enthusiasts can expect a level of audio fidelity that truly transforms the way they experience sound.