Mitsubishi Electronics WD-62530 manual Remote Control, Overview, Record/Playback Keys

30Chapter 3. TV Operation

Remote Control

Overview

1. Slide Switch: Selects the A/V device to be controlled

	by the remote control. Set the slide switch to TV for
	operation of the TV . Control of other device types
	requires programing (see Chapter 5).
2.	SLEEP: Sets the TV to turn off within 2 hours. See the
	next page for instructions.
3.	Digits/Letters: Allow you to tune to a channel by
	entering channel numbers; press ENTER for faster
	tuning. Use numbers and the —/CANCELkey to enter
	digital sub-channels.
	Also use for entering information (letters and numbers)
	to name channels. To select letters, repeatedly press
	the associated number key. For example, to enter “C”
	press the 2 key four times, then press ENTER. The fol-
	lowing special characters are available with the 1 and 0
	keys:
			1	!	&	blank space
			0	/	*	-
4. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
	channel numbers, adds a separator between main
	and sub-channel numbers. Clears FAV and some
	menu entries.
5.	POWER: Turns TV power on and off.
6.	QV (QuickView™): Switches between the current
	channel and the last channel viewed.
7.	MUTE: Turns TV sound off or on.
8.	SPLIT:	Turns Split Screen mode on and off.
9.	VOL	/ (Volume Up/Down): Changes sound level.

10.CH/PAGE / (Channel or Page Up/Down): Scans up or down through memorized channels. Pages up and down through screens when used with TV Guide On Screen® or ChannelView™.

11FAV (Favorites): Scans through memorized lists of favorite channels. See “Channel Menu” in chapter 4,

“TV Menu Settings,” for more information.

Note: The TV’s remote control can operate other audio/video devices.

See Chapter 5 for:

instructions on programming the remote.

a list of functions available for controlling other devices.

12.FORMAT: Changes the shape and size of the main TV picture. When in Split Screen mode, changes the size of the split images while maintaining their aspect ratios.

13.INPUT: Displays the Input Selection menu from which you can select an input source to view, such as an antenna input (ANT 1/2) or a connected device.

14. (Adjust Up/down/Left/Right): Navigate menus and change settings.

15.ENTER: Selects a channel number or menu item.

16.GUIDE: Displays or removes ChannelView™ on-screen channel listing for ANT 1 and ANT 2.

17.INFO: Displays an on-screen summary of the current device in use and any broadcast information available, including current V-Chip information. See Chapter 3 for details.

18.AUDIO: Selects individual audio settings for adjustment.

19.VIDEO: Selects individual video settings for adjustment.

20.MENU: Displays the main TV menu using the on-screen menu system. When a sub-menu is open, backs up one level.

21.EXIT: Closes all TV on-screen menus and displays and returns to normal TV viewing.

22. F1–F4:When programmed, these buttons work like the A, B, C, D buttons on some cable boxes and satellite receivers. Program the remote control for your equip- ment and test the keys. See Chapter 5.

24. (PAUSE): Freezes a broadcast TV picture. When Split Screen is displayed, freezes the sub-picture. See below for use with recordable media.

Record/Playback Keys

To enable the recording and playback functions, program the remote for your VCR or DVD player/recorder and set the slide switch to VCR or DVD. See Chapter 5 for instruc- tions on programming the remote.

23. (RECORD): Records with a VCR or DVD recorder.

24. (PAUSE): Pauses a VCR or DVD. See above for use during TV viewing.

25. (STOP): Stops play of a VCR or DVD.

26. (REVERSE): Rewinds a VCR. Reverse scans a DVD.

27. (PLAY): Plays a VCR or DVD.

28. (FAST FORWARD): Fast forwards a VCR. Forward scans a DVD.