Mitsubishi Electronics PD-4265, PD-5065 manual

Page 45

*1 Only when using a graphic accelerator board that is capable of displaying 852×480.

*2 Display only 640 lines with the screen center of the vertical orientation located at the center.

*3 The picture is displayed in the original resolution. The picture will be compressed for other signals.

*4 The aspect ratio is 5:4. This signal is converted to a 720 dots×768 lines signal.

*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above.

*6 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer’s video port.

*7 Other screen modes (EXPAND and STRETCH) are available as well.

*8 When viewing a moving picture at a vertical frequency greater than 65Hz, the picture may sometimes be unstable (jumpy). If this occurs, please set the refresh rate of the external equipment to 60Hz.

To view 480I@60Hz (480 interlaced lines, 60Hz refresh rate) or 576I@50Hz (567 interlaced lines, 50Hz refresh rate) when sync polarity is “Sync on Green”, set “RGB SELECT” to “MOTION”.

*9 CVT standard compliant.

NOTE:

•While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer.

•This monitor has a resolution of 1024 dots × 768 lines. It is recommended that the input signal should be XGA, wide XGA, or equivalent.

•With digital input some signals are not accepted.

•The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

•If you are connecting a composite sync signal, use the HD terminal.

•“IBM PC/AT” and “XGA” are registered trademarks of International Business Machines, Inc. of the United States.

•“Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

36

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Owner’s Guide Page Important Safety Instructions PD-4265/PD-5065 Important Information PrecautionsDo not turn off Orbiter To avoid damage and prolong operating lifePage Cleaning Safeguards Plasma Display Screen & CabinetImportant No Abrasives Contents of the Package Features you’ll enjoy includeIntroduction Introduction to the PD-4265/ PD-5065 Plasma DisplaysContents Installation General InstructionsMinimum ventilation requirements Front View Part Names and FunctionRGB2 / COMPONENT2 Side View Rear ViewFormat Remote ControlBattery Installation and Replacement How to use the remote controlHandling the remote control Operating RangeInput ConnectionsConnecting Your DVD Player Connecting Your VCRMonitorLinkª Connections Pin Assignments for D-sub HD15 pin RGB Analog ConnectorMonitorLink and MonitorLink Control External Hdmi Device with Hdcp ConnectionCable Management Cover assembly Cable Management for PD-4265Cable Management Cable Management for PD-5065 To cancel the sound To adjust the sound volumeTo check the settings Basic OperationsTo set the off timer To cancel the off timerTo check the remaining time Format Sizes When viewing videos or digital video discs Supported resolution Format Operation with Computer SignalsNarrow screen size 43 or Sxga Expand screen sizeMenu Operations Menu ControlsMain menu Sub menu Sub menu 3 Sub menu Menu Tree Restoring the factory default settings Picture Settings Menu Storing picture settingsAdjusting the picture Reducing noise in the picture Example Setting NR-3 NR  Types of noise reductionAdjusting the color to the desired level Setting the color temperatureMaking the Low Tone adjustments Changing the Gamma CurveAdjusting the pedestal level black level Color AdjustFilm Mode Image Adjust Settings Menu Audio Settings MenuSelecting the Input of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSetting the language for the menus SET UP Settings MenuSetting the BNC connectors Setting high definition images to the suitable screen sizeSetting the black level for Hdmi signal Setting the video signal formatSetting the background color when no signal is being input Setting the screen size for S1/S2 video input Setting the position of the menuTurning the display menu on/off Refer to pages 15 & 16 for items to be reset Resetting to the default valuesSetting the power management for computer images Function Settings MenuPOWER/STANDBY indicator Setting the Input Skip Orbiter settings  Peak Bright settings INVERSE/WHITE Settings  Soft Focus settingsExample Setting Orbiter Menu to OFF Signal Information Menu Orbiter Menu settings Example Setting Menu Contrast to NormalApplication Type of connector D-Sub 9-pin maleMonitorLink Control Codes Reference Communication ParametersSymptom Checks Remedy TroubleshootingPage Signals PD-4265 SpecificationsChinese, Russian PD-5065 SpecificationsTable of Signals Supported Supported resolution PD-4265Computer input signals supported by this system Page Supported resolution PD-5065 Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity

PD-4265, PD-5065 specifications

The Mitsubishi Electronics PD-5065 and PD-4265 are plasma display screens that have garnered attention for their exceptional picture quality, robust design, and advanced technologies. These models are popular choices for both home theater setups and professional environments, combining aesthetics with functionality.

The PD-5065 features a 50-inch display, while the PD-4265 comes with a slightly smaller 42-inch screen. One of the standout characteristics of these models is their impressive resolution. The high-definition capability provides crisp and clear images, making them ideal for watching movies, playing video games, or viewing stunning graphics in a presentation scenario. Both models support a resolution of 1366 x 768 pixels, ensuring detailed visuals that maintain clarity even during fast-paced action scenes.

A defining technology in both models is Mitsubishi's proprietary Real Color Processing, which enhances the color fidelity of the displayed images. This system ensures that colors appear more vibrant and true-to-life, providing users with an enhanced viewing experience. Additionally, the plasma screens utilize anti-reflective coatings, which minimize glare and reflections, making them suitable for various lighting conditions.

The PD-5065 and PD-4265 also incorporate high brightness levels, allowing them to perform well even in brightly lit rooms. This brightness allows for an engaging viewing experience without compromising visibility. Furthermore, the contrast ratio of 4000:1 on these displays further enhances the depth and richness of colors, providing a more immersive experience.

Another notable feature of these displays is their connectivity options. Both models come equipped with multiple input options, including HDMI, VGA, and component video, enabling compatibility with a wide range of devices. This aspect makes it easy to connect gaming consoles, Blu-ray players, and set-top boxes, further enhancing their versatility for various applications.

Energy efficiency is another characteristic that Mitsubishi prioritized in these models. The use of advanced plasma technologies helps to reduce power consumption, which is an essential consideration for environmentally conscious consumers.

Overall, the Mitsubishi Electronics PD-5065 and PD-4265 plasma displays offer a compelling combination of performance, design, and technology. Their high-quality visuals, robust features, and versatile connectivity options make them an excellent choice for both entertainment and professional use. Whether in a home theater or a corporate setting, these models deliver a premium viewing experience.
Top Page Image Contents