Mitsubishi Electronics PD-4265, PD-5065 manual To avoid damage and prolong operating life

Page 5

NOTE:

When you connect a computer to this monitor, use an RGB cable including the ferrite cores on both ends of the cable. If you do not do this, this display will not conform to mandatory FCC standards.

Attaching the ferrite cores:

Attach the ferrite cores on both ends of the power cable (supplied).

Close the lid tightly until the clamps click. *HDMI cable doesn’t need ferrite cores.

Power cable (supplied)

core (large)

core (large)

To avoid damage and prolong operating life:

1.Use only with 100V-240V 50/60Hz AC power supply. Continued operation at line voltages greater than 100- 240 Volts AC will shorten the life of the unit, and might even cause a fire hazard.

2.Handle the unit carefully when installing it and do not drop.

3.Set the unit away from heat, excessive dust, and direct sunlight.

4.Protect the inside of the unit from liquids and small metal objects. In case of an accident, unplug the unit and have it serviced by an authorized Mitsubishi Service Center.

5.Do not hit or scratch the panel surface as this causes flaws on the surface of the screen.

6.For correct installation and mounting it is strongly recommended to use a trained, authorized Mitsubishi dealer.

7.As is the case with any phosphor-based display (like a CRT monitor, for example) light output will gradually decrease over the life of a Plasma Display Panel.

Recommendations to avoid or minimize uneven phosphor aging:

Like all phosphor-based display devices and all other gas plasma displays, plasma displays can be susceptible to uneven phosphor aging under certain circumstances. Certain operating conditions, such as the continuous display of a static image over a prolonged period of time, can result in uneven phosphor aging if proper precautions are not taken. To protect your investment in this Mitsubishi plasma display, please adhere to the following guidelines and recommendations for minimizing this type of damage:

1.Do not turn off ORBITER.*

2.Always enable and use your computer’s video game or DVD player screen saver during use with these sources.

3.Display a moving image whenever possible.

4.Change the position of the menu display from time to time.

5.Always power down the display when you are finished using it.

If the plasma display is in long term use or continuous operation, take the following measures to reduce the likelihood of uneven phosphor aging:

1.Do not turn off ORBITER.*

2.Lower the Brightness and Contrast levels as much as possible without impairing image readability.

3.Display an image with many colors and color gradations (i.e. photographic or photo-realistic images).

4.Create image content with minimal contrast between light and dark areas. Use complementary or pastel colors whenever possible.

5.Avoid displaying images with few colors and distinct, sharply defined borders between colors.

NOTE:

Uneven phosphor aging/burn-in is not covered by the warranty.

Contact Mitsubishi at 1-800-332-2119 for other recommended procedures that will best suit your particular application needs.

*ORBITER - Uneven phosphor aging/burn-in reduction feature. To minimize the risk of uneven phosphor aging/burn-in when displaying still images, the Mitsubishi PD-4265 and PD-5065 offers a built-in feature known as ORBITER. The ORBITER feature intermittently shifts the screen image horizontally and vertically in small increments. This intermittent screen movement is usually not evident in full motion video. In some instances the ORBITER shift might be evident while displaying static guides or menus. The default setting for ORBITER is On (AUTO1). Mitsubishi chose this setting to help reduce uneven phosphor aging. Please do not shut the ORBITER off. For more information regarding ORBITER, see page 27.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Owner’s Guide Page Important Safety Instructions PD-4265/PD-5065 Important Information PrecautionsDo not turn off Orbiter To avoid damage and prolong operating lifePage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Contents of the Package Features you’ll enjoy includeIntroduction Introduction to the PD-4265/ PD-5065 Plasma DisplaysContents Minimum ventilation requirements InstallationGeneral Instructions Front View Part Names and FunctionRGB2 / COMPONENT2 Side View Rear ViewFormat Remote ControlBattery Installation and Replacement How to use the remote controlHandling the remote control Operating RangeInput ConnectionsConnecting Your DVD Player Connecting Your VCRMonitorLinkª Connections Pin Assignments for D-sub HD15 pin RGB Analog ConnectorMonitorLink and MonitorLink Control External Hdmi Device with Hdcp ConnectionCable Management Cable Management Cover assemblyCable Management for PD-4265 Cable Management for PD-5065 To cancel the sound To adjust the sound volumeTo check the settings Basic OperationsTo check the remaining time To set the off timerTo cancel the off timer Format Sizes When viewing videos or digital video discs Supported resolution Format Operation with Computer SignalsNarrow screen size 43 or Sxga Expand screen sizeMenu Operations Menu ControlsMain menu Sub menu Sub menu 3 Sub menu Menu Tree Restoring the factory default settings Adjusting the picture Picture Settings MenuStoring picture settings Reducing noise in the picture Example Setting NR-3 NR  Types of noise reductionAdjusting the color to the desired level Setting the color temperatureMaking the Low Tone adjustments Changing the Gamma CurveFilm Mode Adjusting the pedestal level black levelColor Adjust Image Adjust Settings Menu Audio Settings MenuSelecting the Input of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSetting the language for the menus SET UP Settings MenuSetting the BNC connectors Setting high definition images to the suitable screen sizeSetting the background color when no signal is being input Setting the black level for Hdmi signalSetting the video signal format Turning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Refer to pages 15 & 16 for items to be reset Resetting to the default valuesSetting the power management for computer images Function Settings MenuPOWER/STANDBY indicator Setting the Input Skip Orbiter settings  Peak Bright settings INVERSE/WHITE Settings  Soft Focus settingsExample Setting Orbiter Menu to OFF Signal Information Menu Orbiter Menu settings Example Setting Menu Contrast to NormalApplication Type of connector D-Sub 9-pin maleMonitorLink Control Codes Reference Communication ParametersSymptom Checks Remedy TroubleshootingPage Signals PD-4265 SpecificationsChinese, Russian PD-5065 SpecificationsComputer input signals supported by this system Table of Signals SupportedSupported resolution PD-4265 Page Supported resolution PD-5065 Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity

PD-4265, PD-5065 specifications

The Mitsubishi Electronics PD-5065 and PD-4265 are plasma display screens that have garnered attention for their exceptional picture quality, robust design, and advanced technologies. These models are popular choices for both home theater setups and professional environments, combining aesthetics with functionality.

The PD-5065 features a 50-inch display, while the PD-4265 comes with a slightly smaller 42-inch screen. One of the standout characteristics of these models is their impressive resolution. The high-definition capability provides crisp and clear images, making them ideal for watching movies, playing video games, or viewing stunning graphics in a presentation scenario. Both models support a resolution of 1366 x 768 pixels, ensuring detailed visuals that maintain clarity even during fast-paced action scenes.

A defining technology in both models is Mitsubishi's proprietary Real Color Processing, which enhances the color fidelity of the displayed images. This system ensures that colors appear more vibrant and true-to-life, providing users with an enhanced viewing experience. Additionally, the plasma screens utilize anti-reflective coatings, which minimize glare and reflections, making them suitable for various lighting conditions.

The PD-5065 and PD-4265 also incorporate high brightness levels, allowing them to perform well even in brightly lit rooms. This brightness allows for an engaging viewing experience without compromising visibility. Furthermore, the contrast ratio of 4000:1 on these displays further enhances the depth and richness of colors, providing a more immersive experience.

Another notable feature of these displays is their connectivity options. Both models come equipped with multiple input options, including HDMI, VGA, and component video, enabling compatibility with a wide range of devices. This aspect makes it easy to connect gaming consoles, Blu-ray players, and set-top boxes, further enhancing their versatility for various applications.

Energy efficiency is another characteristic that Mitsubishi prioritized in these models. The use of advanced plasma technologies helps to reduce power consumption, which is an essential consideration for environmentally conscious consumers.

Overall, the Mitsubishi Electronics PD-5065 and PD-4265 plasma displays offer a compelling combination of performance, design, and technology. Their high-quality visuals, robust features, and versatile connectivity options make them an excellent choice for both entertainment and professional use. Whether in a home theater or a corporate setting, these models deliver a premium viewing experience.
Top Page Image Contents