Mitsubishi Electronics PD-4265, PD-5065 manual

Page 47

*1 Only when using a graphic accelerator board that is capable of displaying 852×480.

*2 This signal is converted to a 1024 dots × 640 lines signal.

*3 The picture is displayed in the original resolution.

*4 The aspect ratio is 5:4. This signal is converted to a 960 dots×768 lines signal.

*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above.

*6 To connect the display to Macintosh computer, use a monitor adapter (NOT INCLUDED).

*7 Other screen modes (EXPAND and STRETCH) are available as well.

*8 When viewing a moving picture at a vertical frequency greater than 65Hz, the picture may sometimes be unstable (jumpy). If this occurs, please set the refresh rate of the external equipment to 60Hz.

To view 480I@60Hz (480 interlaced lines, 60Hz refresh rate) or 576I@50Hz (567 interlaced lines, 50Hz refresh rate) when sync polarity is “Sync on Green”, set “RGB SELECT” to “MOTION”.

*9 CVT standard compliant.

NOTE:

•While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer.

•When a 1280 dots × 1024 lines signal or 1600 dots × 1200 lines signal is input to the monitor, the picture will be compressed.

•This display has a resolution of 1365 dots × 768 lines. It is recommended that the input signal should be XGA, wide XGA, or equivalent.

•With digital input some signals are not accepted.

•The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

•If you are connecting a composite sync signal, use the HD terminal.

•“IBM PC/AT” and “XGA” are registered trademarks of International Business Machines, Inc. of the United States.

•“Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

38

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Owner’s Guide Page Important Safety Instructions PD-4265/PD-5065 Important Information PrecautionsDo not turn off Orbiter To avoid damage and prolong operating lifePage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Introduction to the PD-4265/ PD-5065 Plasma Displays Features you’ll enjoy includeContents of the Package IntroductionContents Minimum ventilation requirements InstallationGeneral Instructions Front View Part Names and FunctionRGB2 / COMPONENT2 Side View Rear ViewFormat Remote ControlOperating Range How to use the remote controlBattery Installation and Replacement Handling the remote controlInput ConnectionsConnecting Your DVD Player Connecting Your VCRExternal Hdmi Device with Hdcp Connection Pin Assignments for D-sub HD15 pin RGB Analog ConnectorMonitorLinkª Connections MonitorLink and MonitorLink ControlCable Management Cable Management Cover assemblyCable Management for PD-4265 Cable Management for PD-5065 Basic Operations To adjust the sound volumeTo cancel the sound To check the settingsTo check the remaining time To set the off timerTo cancel the off timer Format Sizes When viewing videos or digital video discsExpand screen size Format Operation with Computer Signals Supported resolution Narrow screen size 43 or SxgaMenu Operations Menu ControlsMain menu Sub menu Sub menu 3 Sub menu Menu Tree Restoring the factory default settings Adjusting the picture Picture Settings MenuStoring picture settings  Types of noise reduction Example Setting NR-3Reducing noise in the picture  NRChanging the Gamma Curve Setting the color temperatureAdjusting the color to the desired level Making the Low Tone adjustmentsFilm Mode Adjusting the pedestal level black levelColor Adjust Adjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Selecting the Input of the audio connectorsSetting high definition images to the suitable screen size SET UP Settings MenuSetting the language for the menus Setting the BNC connectorsSetting the background color when no signal is being input Setting the black level for Hdmi signalSetting the video signal format Turning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Refer to pages 15 & 16 for items to be reset Resetting to the default valuesSetting the Input Skip Function Settings MenuSetting the power management for computer images POWER/STANDBY indicator Soft Focus settings  Peak Bright settings Orbiter settings  INVERSE/WHITE SettingsExample Setting Menu Contrast to Normal Signal Information MenuExample Setting Orbiter Menu to OFF  Orbiter Menu settingsCommunication Parameters Type of connector D-Sub 9-pin maleApplication MonitorLink Control Codes ReferenceSymptom Checks Remedy TroubleshootingPage Signals PD-4265 SpecificationsChinese, Russian PD-5065 SpecificationsComputer input signals supported by this system Table of Signals SupportedSupported resolution PD-4265 Page Supported resolution PD-5065 Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity

PD-4265, PD-5065 specifications

The Mitsubishi Electronics PD-5065 and PD-4265 are plasma display screens that have garnered attention for their exceptional picture quality, robust design, and advanced technologies. These models are popular choices for both home theater setups and professional environments, combining aesthetics with functionality.

The PD-5065 features a 50-inch display, while the PD-4265 comes with a slightly smaller 42-inch screen. One of the standout characteristics of these models is their impressive resolution. The high-definition capability provides crisp and clear images, making them ideal for watching movies, playing video games, or viewing stunning graphics in a presentation scenario. Both models support a resolution of 1366 x 768 pixels, ensuring detailed visuals that maintain clarity even during fast-paced action scenes.

A defining technology in both models is Mitsubishi's proprietary Real Color Processing, which enhances the color fidelity of the displayed images. This system ensures that colors appear more vibrant and true-to-life, providing users with an enhanced viewing experience. Additionally, the plasma screens utilize anti-reflective coatings, which minimize glare and reflections, making them suitable for various lighting conditions.

The PD-5065 and PD-4265 also incorporate high brightness levels, allowing them to perform well even in brightly lit rooms. This brightness allows for an engaging viewing experience without compromising visibility. Furthermore, the contrast ratio of 4000:1 on these displays further enhances the depth and richness of colors, providing a more immersive experience.

Another notable feature of these displays is their connectivity options. Both models come equipped with multiple input options, including HDMI, VGA, and component video, enabling compatibility with a wide range of devices. This aspect makes it easy to connect gaming consoles, Blu-ray players, and set-top boxes, further enhancing their versatility for various applications.

Energy efficiency is another characteristic that Mitsubishi prioritized in these models. The use of advanced plasma technologies helps to reduce power consumption, which is an essential consideration for environmentally conscious consumers.

Overall, the Mitsubishi Electronics PD-5065 and PD-4265 plasma displays offer a compelling combination of performance, design, and technology. Their high-quality visuals, robust features, and versatile connectivity options make them an excellent choice for both entertainment and professional use. Whether in a home theater or a corporate setting, these models deliver a premium viewing experience.
Top Page Image Contents