Auto Setup

363. Using TV Features

Sound Projector, continued

153 and 249 Series

Auto setup uses a calibration microphone to optimize Sound Projector performance for most room condi- tions. If the room is very large or has many obstacles affecting the sound beams, you may wish to try manual setup, which is done without the microphone.

Initial Preparation

1.	Position and connect the TV as described under
	“Before You Begin,” page 34.
2.	Power on the TV and external subwoofer, if any.
3.	Plug the microphone cable into the TV’s INPUT 3
	left audio jack.

Microphone Placement

•Make sure there are no large obstacles between the TV and microphone.

•Place the microphone

-- On a flat, level surface at least six feet away from the front of the TV.

-- On a tripod or on the backrest of your seating.

-- At the same height yours ears would be when watching TV. The height must be within 3 vertical feet of the height of the TV’s speaker array.

-- Centered in front of the TV, not off to the side.

4. Place the microphone as described in the guide-

lines on this page.

Start Auto Setup

1. Press MENU and go to Initial > SoundPro.

6 ft. minimum

Microphone

Set the microphone on a level surface at ear height at least six feet from the TV. Use a seat backrest or tripod so as to pick up sound from all directions.

Maximum height above speakers

2.	Press ENTER. Set Mode to Auto.
3.	Highlight START and press
	ENTER.

5.Quietly exit the room right away. The calibration sequence will start in a few seconds and may be loud. It is important to leave the room as your pres- ence will interfere with the calibration process.

6.Wait for completion of setup before returning to the room.

7.Play some sample audio material to check the sound quality.

Note: Do not perform manual adjustments after run- ning Auto setup, as doing so will erase all set- tings defined during Auto setup.

8.Store the microphone out of direct sunlight and away from heat.

Height of TV speakers

Be sure the 3 ft. height of the

microphone is within three feet of the speaker height.

Microphone

Center the micro- phone in front of the TV.

SeriesLT-40151 specifications

The Mitsubishi Electronics Series LT-40151 is a cutting-edge display solution designed for various professional applications, offering a combination of advanced technology, superior features, and robust performance. This model is particularly known for its impressive visual quality, energy efficiency, and flexibility, making it suitable for both commercial and industrial environments.

One of the main features of the LT-40151 is its 40-inch LED display, which provides vibrant color reproduction and sharp image clarity. The high-definition resolution ensures that images and videos maintain their detail, whether used in presentations, advertising, or informational displays. The display also boasts a wide viewing angle, allowing for visual consistency from different positions in the room, making it ideal for large audiences.

A notable technological advancement of the LT-40151 is its integrated image processing capabilities. This enables the screen to optimize content in real-time, adjusting brightness, contrast, and color levels based on ambient lighting conditions. This automatic adaptation ensures that visuals remain clear and legible in various environments, whether in bright retail settings or dimly lit conference rooms.

Durability is another critical characteristic of the LT-40151. It is designed to withstand the rigors of continuous operation, making it an excellent choice for environments that require 24/7 usage. The robust build quality is complemented by energy-efficient features, significantly reducing operational costs over time while minimizing environmental impact.

Connectivity is a strong suit of the LT-40151, supporting a range of inputs including HDMI, DisplayPort, and USB connections. This versatility allows users to connect multiple devices seamlessly, enhancing its usability in diverse scenarios. Additionally, the display is compatible with various mounting options, providing flexibility for installation in various settings.

The user-friendly interface integrated into the LT-40151 facilitates easy navigation and set-up, ensuring that users can quickly adjust settings and configurations to suit their preferences.

In conclusion, the Mitsubishi Electronics Series LT-40151 is a sophisticated display solution that combines advanced visual technology, durability, and flexible connectivity, making it a top choice for professionals seeking reliable and high-quality performance in their display systems.