![](/images/new-backgrounds/1200586/20058645x1.webp)
2. TV Connections | 23 |
Inputs and Outputs, continued
1. ANT (Antenna)
Connect your main antenna or direct cable service (without a cable box) to ANT. The ANT input can receive digital and analog
aVHF/UHF antenna or
2.HDMI® Inputs (High-Definition Multimedia Interface)
The HDMI inputs support uncompressed standard and
Mitsubishi recommends you use
These HDMI inputs can also accept digital DVI video signals. To connect a device’s DVI output to the TV’s HDMI input, use an
Use the HDMI inputs to connect to
The TV’s HDMI inputs are compatible with many
These inputs are HDCP
HDMI Cable Categories
HDMI cables are available as Standard and
•
•Standard HDMI Cables. Standard HDMI cables may be unmarked. They are suitable for standard HDTV 720p, 1080i, and 1080p signals with
3. Y/Video (Composite Video)
Use the adjacent AUDIO R and L inputs if you wish to send audio to the TV.
4. Y/VIDEO Pb Pr (Component Video)
Use the adjacent AUDIO R and L jacks if you wish to send audio to the TV.
5. AUDIO
Analog stereo inputs for use in conjunction with adja- cent composite or component video jacks.
6. NetC Out/IR IN
265 Series
As an output: Connect IR emitters to this jack to send NetCommand control signals to external
As an input: Accepts control signals from an external controller when set up by your professional installer.
7. LAN
Use the LAN Ethernet jack for streaming internet video to the TV. See page 42 for setup. Visit www.VUDU.com for details about VUDU™ service.
8. USB
The TV can read JPEG photo files and mp3 music files from a USB storage device connected to this input.
154 Series. Connect a compatible wireless adapter to stream internet content to the TV (page 42).
9. USB (Power Only)
Standard USB
10. DVI/PC INPUT AUDIO
Connect a DVI device to one of the TV’s HDMI inputs and use this jack to send analog audio to the TV.
11. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Incoming analog audio is converted by the TV to PCM digital audio. If you have a digital A/V receiver, in most cases this is the only audio connection needed between the TV and your A/V receiver.
Downloaded From
For assistance call 1(800)