Mitsubishi Electronics 164 Series, 265 Series, 154 Series Operating NetCommand-Controlled Devices

Key Name in

Special Operation Description and Setup

How to Use

Learning Screen

Power On

Manual Power On/Off

1.

Press INPUT.

Use for devices that have only one POWER key.

2.

Highlight the icon for the device to be

powered on or off.

3.

With the Input Selection menu still dis-

played, press POWER to send the power

signal; you may need to press POWER twice.

Note:

If you press POWER without the Input Se-

lection menu displayed, the TV will turn

off.

4.

Press ENTER to switch the TV to the device.

Power On

Automatic Power On/Off

•

To Power On the Device

Power Off

This feature is only for devices that have separate

1.

Press INPUT.

Power On and Power Off keys on their original

2. Highlight the icon for the device to be

remote controls. If your device does not have a

powered on or off.

separate Power Off key, do not use the Power

3.

Press ENTER to switch the TV to the

Off learning position; use only the Manual Power

device and NetCommand will send the

ON/OFF method described above.

Power On command to the device.

In the NetCommand Learn screen:

•

To Power Off the Device

a. “Learn” the Power On command in the

When you turn the TV off, the TV sends all

Power On learning position.

learned Power Off commands to all devices.

b. “Learn” the Power Off command in the

Power Off learning position.

Menu

Displaying a Menu for the Current Device

Press TOOLS and number 3 to send the menu

“Learn” the MENU key on the original remote in the

signal to the device.

Menu learning position.

Guide

Displaying the On-Screen Program Guide

1.

While watching the device, press GUIDE to

(cable box or satellite receiver)

display the guide.

1. “Learn” the Guide key on the original remote in

2.

Press PAGE to send the Page Up/Dn com-

the Guide learning position.

mands for the guide.

2. Learn the PAGE UP and PAGE DOWN keys of the

original remote in the Page Up and Page

Down learning positions.

Enter

ENTER-Key Functions (cable boxes, satellite receivers, etc.)

Some devices have two keys that have “enter” functions. One key is for menus and is often labelled

SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand

uses the same ENTER key for both operations.