Handling the Display

•Set up your display on a stable, level surface away from any direct light or heat source, but near a grounded AC outlet.

•Choose a well-ventilated location with an adequate amount of space. Do not block the vents on the back of the display.

•Never lift the display by the desk stand. Use both hands to lift or move the display. Avoid touching the screen.

•Never apply pressure to the screen or touch the screen with bare fingers or with any objects.

•Allow the display unit to reach room temperature before powering on.

•Avoid sudden temperature changes in the environment, as this may cause condensation, which damages the display.

•Never remove the back cover or disassemble the display. There are no user-serviceable parts inside.

•In locations where 240V outlets are used, connect the Dome E2c display only to a center-tapped, 240V, single-phase supply.

•When troubleshooting, check that all cables are properly connected and that your computer is turned on and not in power-saving mode.

•Follow your local governing ordinance for proper disposal or recycling of electronic components.