Planar Dome E2c manual Cleaning the LCD Screen

Page 11

Cleaning the LCD Screen

Use a dry, clean, lint-free cotton cloth to remove surface dust from the display screen. Do not use chemically treated dust cloths.

To remove grease or organic contaminants, follow this procedure:

1Disconnect the power supply from the display.

2 Dampen a soft, clean cloth with a small amount of isopropyl alcohol.

3 Wipe the display screen gently with the dampened cloth.

4 Use a dry, clean, lint-free cotton cloth to wipe off the residue.

Do not spray or use acetone, toluene, or harsh solvents on the display case or screen. Chemical cleansers may cause damage to the display.

Do not touch the LCD screen with your fingers. Skin oils are hard to remove from the screen.

Do not saturate the cleaning cloth. Liquid that drips on the glass may seep into the display case.

11

Image 11
Contents Dome E2c Display Avertissement Avvertenza Advertencia System RequirementsUnpacking the Display Display Components USB-B port USB-A port To install the controller Installing the Display ControllerTo connect the display Connecting the DisplayTo configure the display Installing the Display DriverTo install the display driver To set the display orientation Adjusting the Display PropertiesTo use a dual-display configuration Handling the Display Cleaning the LCD Screen America Sales Europe Sales
Related manuals
Manual 38 pages 22.52 Kb