Installing the Display Controller

Remove any existing graphics card and its driver from your computer system before you install the controller and driver. Also disable any onboard

graphics capability on the motherboard. See safety precautions on page 2.

To install the controller

1Turn off your computer and all peripherals. Disconnect all cables from your computer. Leave the power cord plugged into the grounded outlet.

2 Remove the computer cover.

3Remove any existing graphics card and video signal cable, if necessary.

4Remove the blank bracket from the available PCI Express slot.

5Insert the controller into the slot, align the connector pins, and press the board down until it is firmly seated.

6Secure the mounting bracket.

7 Reattach the computer cover and the peripherals.

Open PCI Express slot

Blank bracket

Controller installed