5 EXTERNAL COMPONENTS
Rear Panel
Push Buttons
Located on the bottom rear panel, you will find a recessed POWER ON push button and a recessed RESET push button. There is also a recessed DIM- MER potentiometer to adjust the display brightness on the 10.4” and 15” mod- els (not available on the 12.1” model). Use a small flat blade screwdriver to adjust the DIMMER pot and to access the POWER ON and RESET push but- tons.
LEDs
There are also 5 LEDs located on the bottom rear panel. They are labeled PWR to indicate power is applied to unit; HDD to indicate the hard disk drive is active; 10Mb, 100Mb, and ACTIVE all indicate Ethernet activity.
18 | MC200 Series Industrial Panel Computers |