Manual P/N MAN-PNLPC-001

Designed, and Manufactured specifically for Mitsubishi Electric Automation, Inc., by AVG

Mitsubishi Electric Automation, Inc. (MEAU)

500 Corporate Woods Parkway, Vernon Hills, IL 60061

Phone: (847) 478-2100 • Fax: (847) 478-2253 • www.meauic.com

AVG Automation

Mitsubishi Approved IC Service Center

4140 Utica Ridge Rd. • Bettendorf, IA 52722-1327

Phone: 1-563-359-7501 • Fax: 1-563-359-9094 • www.avg.net

WARNING!

Programmable control devices such as Panel Computers must not be used as stand-alone protection in any application. Unless proper safeguards are used, unwanted start-ups could result in equipment damage or personal injury. The operator must be made aware of this hazard and appropriate precautions must be taken.

In addition, consideration must be given to the use of an emergency stop function that is independent of the programmable controller.

The diagrams and examples in this user manual are included for illustrative purposes only. The manufacturer cannot assume responsibility or liability for actual use based on the diagrams and examples.

CAUTION

Do not press the Panel Computer touchscreen with any sharp objects. This practice may damage the unit beyond repair.

Trademarks

This publication may contain references to products produced and/or offered by other companies. The product and company names may be trademarked and are the sole property of their respective owners. MEAU and/or AVG Automation disclaims any proprietary interest in the marks and names of others.

No part of this manual shall be copied, reproduced, or transmitted in any way without the prior written consent of AVG Automation. AVG Automation retains the exclusive rights to all information included in this

document.

Mitsubishi Electronics MC 200 manual Manual P/N MAN-PNLPC-001