7 MAINTENANCE AND UPGRADES
6.Reinstall card retainer bracket. Slide bracket into the slot in the front post and secure with a screw in the back post.
7.Adjust card retainer foot until it is securely against the top of the card that you have just installed. Tighten the screw to ensure that the card will remain properly seated in the backplane connector.
8.Replace the rear panel and reconnect the power source.
Card Retainer Foot (3)
Card Retainer Bracket
Rubber Foot Pads (3)
Foot inserted | Bracket |
through bracket slot | |
Secure foot to |
|
bracket with |
|
screw |
|
Rubber foot pad that rests snugly against top of the expansion card
22 | MC200 Series Industrial Panel Computers |
|