JVC AV-32F713, AV-27F803, AV-27F713, AV-27F703, AV-32F803, AV-36F713 Cable and VCR Connections

Page 13

Connections

Cable and VCR Connections

There are three basic types of antenna or cable connections:

•If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1.

•If you have a cable system that requires the use of a cable box to access all the channels, please refer to Diagram #2. If you cannot operate your Picture-In-Picture function using Diagram #2, try the connection shown in Diagram #3. It is possible your cable box allows the signal of only one channel at a time to be sent to your television.

•If you have a cable system that requires the use of a cable box to access certain premium channels, but not “basic” cable channels, please refer to Diagram #3.

•For your convenience, connection to a VCR is also shown in the following diagrams. A

VCR is not necessary for operation of the television or Picture-In-Picture (PIP) func- tion. You may omit the VCR from your connections if you wish.

•For instructions on connecting a VCR only, please see the Quick Setup on page 11.

•For information on using PIP, please see page 47.

•The PIP feature is available on models AV-36F803, AV-32F803 and AV-27F803 only.

Diagram #1

 

AUDIO

VIDEO

S VIDEO

R

L MONO

 

OVER

INPUT 1

 

 

 

INPUT 2

 

INPUT 4

COMPONENT

COMPONENT

AUDIO

R

L MONO

VIDEO

VIDEO

R

L

 

Y

AUDIO OUT

 

PB

 

 

AV COMPULINK

 

 

PR

CABLE or ANTENNA

OUT

IN

OUT OUT

75Ω

(VHF / UHF)

TWO-WAY

SPLITTER

VCR

IN

V L R

OUT

OR

OR

Illustration of AV-27F803

1)Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.

2)Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on the back of the VCR.

3)Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.

4)Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.

5)Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

6)Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

•If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s Left Audio Input.

•Please consult your VCR’s owner’s manual for more information on its operation.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Color Television Users Guide Important Safety Precautions Installation Important SafeguardsPlease read and retain for your safety Important Recycling InformationTherefore USEService Table of Contents Unpacking Your Television RF Connectors Input PlugVideo Plug AV Compu Link III Cable Matching TV stand is also available optionalFront Panel Diagram Rear Panel DiagramsTV Models and Remotes Guide Models AV-36F803, AV-32F803, and AV-27F803AV-36F803, AV-32F803 AV-36F703, AV-32F703 Remote Control RM-C325G Remote Control RM-C326GAV-27F803 AV-27F703 AV-27F713 Step One The Remote Control Quick SetupGetting Started Basic OperationProceed to Step Three Step Two Making Basic ConnectionsStep Three The Plug In Menu Stop The Quick Setup is completeCable and VCR Connections ConnectionsDiagram #2 Diagram #3 Connecting to a DVD player Connecting to a Camcorder Connecting to an External AmplifierConnecting to JVC AV Compu Link TV Catv VCR DVD 169 Power Mode Remote ControlRemote Programming Setting the CATV, VCR and DVD CodesCable Box or Satellite codes MGA VCR codesJVC DVD codesOnscreen Menus Using the GuidePurity is only for models AV-36F803, AV-36F713 and AV-36F703 Onscreen Menu SystemPlug In Menu Auto Tuner SetupIntroduction LanguageAuto Clock Set Thank YOU Manual Clock SetChannel Summary Channel SummarySpecial Note about Ratings ChipUS V-Chip Ratings Directions to set US V-Chip Ratings Setting US V-Chip RatingsExample Setting ratings with the V-Chip buttonDirections to set Movie Mpaa Ratings Movie RatingsDirections to set Canadian V-Chip Ratings Canadian V-Chip RatingsDirections to Block Unrated Programs Unrated ProgramsSet Lock Code Picture Settings Noise Muting Color TemperatureVSM Velocity Scan Modulation Bass Sound SettingsTreble BalanceGeneral Items On/Off TimerFront Panel Lock Closed CaptionThan 3 seconds XDS ID Auto Shut OffV2 Component-In Purity AV-36F803, AV-36F703, AV-36F713 onlyMenu Button FunctionsExit and PIP Off DisplaySleep Timer Message Sleep TimerVideo Status Hyper Surround100+ Button BBEReturn+ InputVCR/DVD Switch TV/CATV SwitchTheaterPro D6500K VCR ButtonsOn/Move Button Functions PIPSwap FreezeChannel +/- for PIP SourceCable/Satellite Search Codes Function Search CodesVCR Search Codes Function DVD Player Search Codes FunctionProblems Check TroubleshootingThis limited warranty provided by JVC does not cover WarrantyParts LaborJVC Company of America HOW to Locate Your JVC Service Center Authorized Service CentersDo not service the television yourself AccessoriesSpecifications subject to change without notice SpecificationsPage JVC Company of America JVC CANADA, INC
Top Page Image Contents