
General operations
Power button
Press any button (except OPEN) or insert disc to switch the unit on. Press POWER button for several seconds to switch the unit off.
Volume control
Press VOL+/VOL- buttons to adjust the volume level.
Audio settings adjustment
Press SEL button until the display shows: VOL => BAS => TRE => BAL => FAD. Press VOL+/VOL- buttons to adjust each setting. Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the needed item: TA SEEK/ALARM, MASK DPI/ALL, TA VOL, RETUNE L/S, EQ MODE, LOUD ON/OFF, CLK FORMAT, VOL LAST/ADJ,
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP
(Transport Program) information for 5 seconds. Press VOL+/VOL- buttons to select the desired mode: TA ALARM and TA SEEK.
-TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station, which has not the same station (PI – Program Information) as the last station, but has the TP information. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When the same PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information.
-TA ALARM
During searching the radio does not retune but the double beep sound (alarm) is output.
MASK mode
14