Planar 60B manual · Trouble Shooting, Problem Action

·Trouble Shooting

Take the following steps first and if you still have the same problem, turn off the power and contact an authorized service center.

• Screen related Matters

Problem	Action
The screen does not appear	Is the power plug pulled out? Insert the power plug. Turn
	the main power button on and press the power button of
	the remote control.
	This problem occurs for a brief time in the process of
The screen appears too	image elimination processing in order not to show the
	noise of screen that can occur when the power is turned
slowly after the power is turned on.	on. But if the screen does not come after 1 minute has
	passed, contact an authorized service center.
Screen is too bright or too dark.	Control brightness or Contrast. Please refer to page 29.
Screen is too large or too small.	Adjust the screen size using ARC button. Please refer to
	page 30.
Stripes appears on the screen	Stop using wireless telephones, hair driers, and electrical
and it shakes	drills.
Screen appears in black and white.	Adjust colour. Please refer to page 33.
PIP does not appear.	Check that PDP and external equipment are
	connected.Check of the PIP Input by pressing PIP input.
The screen does not move.	Press the still button. Please refer to page 26.Check if
	stopped screen of external equipment is pressed.
	press AUTO ADJ button. If the screen is still abnor-
Computer Input Screen is abnormal.	mal after automatic adjustment, adjust in user
	mode. Please refer to page 33.
	On Time setting works only when turning off the PDP mon-
On Time setting does not work.	itor with the remote control or sub-power button. (Because
	when turning off by pressing the main power button of the
	monitor, the Timer setting is deleted.

4 8