JVC XV-NP10S manual Important Products Safety Instruction

Page 3

Important Products Safety Instruction

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION: Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product and keep this brochure and the operating instructions packaged with your product for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

G-2

Image 3
Contents Player’s region code is printed on the rear of the player Audio/Video files playback Changing the initial settingsRegion code of DVD Video Before operationPage Important Products Safety Instruction USE About this manual Supplied accessoriesPrecautions Table of contentsBefore operation About playable mediaCare and handling of discs Display window How to open/close the card doorNames of parts and controls Front panelTo change the brightness of the display window Remote control unitConnecting to a TV PreparationsConnections Connecting to a TV with component jacks Progressive scan video playback availablePicture Source Speakers see Connecting to optional audio equipmentConnecting to a stereo audio amplifier/receiver Connecting to a digital audio devicePrecautions of the safe use of batteries Using the remote control unitConnecting the power cord To install batteriesOperating the TV To use the remote control unit for TV operationTo control the volume of a JVC’s amplifier or receiver Manufacturer code listInitial setup Basic operationsTurning on/off the player If a menu is shown on the TV screen Basic playbackResuming playback To play back in slow motion To advance or reverse playback rapidly while monitoringX1.5 Quick Playback with sound To advance a still picture frame by frameUsing the numeric buttons Locating the beginning of a scene or songTo replay the previous scenes One touch replay function To specify a desired title Advanced operationsPlaying from a specific position To locate a desired scene from the DVD menuPress on Screen twice To dismiss the menu barPress the numeric buttons 0 to 9 to enter Desired timeChanging the playback order To play back in a specific order Program playTo play back in random order Random play To quit repeat playback Repeat playbackTo repeat a desired part A-B repeat playback To stop repeat playbackScene angle To change the audio language or sound AudioTo select a scene angle of DVD Video Angle To return to the normal playback To adjust the picture character VFPSpecial picture/sound effect To zoom in picturesTo bring up the menu bar Basic operation procedureMenu bar functions To change sound field Sound EffectMenu bar functions for SVCD/Video CD/ Audio CD Menu bar functions for DVD VideoAudio/Video files playback PrecautionsAudio/Video files playback OutlineCurrent Basic operationsCurrent media Select these sections to show Upper layer TrackDirect selection for Jpeg files Mode Type of wipe Slide show playbackTo change the effect on displaying images BGM slide show playback About the Preference display Changing the initial settingsHow to set preferences Selecting preferencesON, OFF Language menuPicture menu ENGLISH, FRENCH, SpanishOthers menu Audio menuBring up the Others menu Limiting playback by childrenTo set Parental Lock for the first time DivX RegistrationPress 5/∞ to move To select Parental Lock and press Enter You can change the parental lock settings laterMoves to Country Code if you enter the correct password Press 5/∞ to move to Temporary RELEASE, then press EnterOperation AV Compu Link remote control systemConnection and setup Additional informationMP3/WMA/JPEG/MPEG-4/DivX TroubleshootingPower AudioAppendix a Digital output signal chart SpecificationsFor Appendix B Country/Area code list for Parental LockAppendix D Glossary Page Page XV-NP10S DVD PLAYER/MEMORY Card Reader