JVC XV-M50BK manual To change the settings Parental Lock, Screen display appears, On the TV screen

Initial settings

To change the settings [PARENTAL LOCK]

You can change the Parental lock settings later.

4 To change the set level, use CURSOR 2/3 to

select the desired level while points [Set Level], and then press ENTER.

moves to [PASSWORD].

							TV	DVD
			DISC		STANDBY/ON
			SELECT		TV		DVD
	PLAY			3D	TV/VIDEO
	MODE		PHONIC		CANCEL		RETURN
		TV1		TV2			TV3
2-1, 5-1		1		2			3
		TV4		TV5			TV6
		4		5			6
		7		8			9
		TV7		TV8			TV9
		TV -/--		TV0			MUTING
		10		0			+10
							THEATER
	ANGLE		SUBTITLE		AUDIO		POSITION
	DIGEST						ZOOM
	PREV						NEXT
		IOUS
1		4					¢
		CLEAR		SELECT			STROBE
				3
		1				¡
		7					8
			–			S	LOW+
		SLOW
	TITLE			CH+			MENU
	VOL			5			VOL
	-						+
		5		ENTER			5
				∞
	C	HOIC		CH-			Y
							DISPLA
		E

1, 2-2, 3-2,

4-2, 5-2

3-1, 4-1

5 Enter the password using the numeric buttons (0 to 9) and press ENTER.

moves to [EXIT].

The password entered in the above step becomes the new password. If you do not change the password, enter the same password as in the step 2. Even if you want to change only the country code and/or parental level, do not forget to enter the password after changing the country code and/or parental level. Otherwise, the new country code and/or parental level will not become effective. Pressing ENTER again returns to the opening display.

NOTES

RM-SXVM50JREMOTE CONTROL

7 While a DVD VIDEO disc is stopped or no disc is inserted

1 Press ENTER while holding down 7 on the remote control unit.

The Parental Lock on-

screen display appears		PARENTAL LOCK
	Country Code		GB
on the TV screen.
	Set Level		8
points [PASSWORD].	PASSWORD		- - - -
			EXIT
	CURRENT PASSWORD? ••• PRESS 0~9 KEY

2 Enter your current 4-digit password using the

numeric buttons (0 to 9) and press ENTER.

	moves to [Country Code] if you enter the correct
settings
	password.
	If you enter the wrong password, “WRONG!
Initial	RETRY...” appears on the TV screen, and you
	cannot go to next step.

3 To change the country code, use CURSOR 2/3 to select the desired country code and press ENTER.

moves to [Set Level].

When you change the country code, you must select the parental level.

•When you enter the wrong password more than 3 times

in step 2 above, moves to [EXIT] automatically and CURSOR 5/∞ does not work.

•If you forget your password in step 2 Enter “8888.”

44