JVC XV-M50BK, XV-M52SL manual Above ALL

Page 52

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

—NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock.;

—NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

VICTOR COMPANY OF JAPAN, LIMITED

EN.

JVC 0401AOMUBNJEM

Image 52
Contents 90%.906 Important for Laser Products Table of Contents Supplied accessories FeaturesIntroduction To playback in random order Random Number indicates the procedural stepSafety precautions Important cautionsNames of parts and controls Preliminary knowledgeFront panel Remote control unit $ DVD STANDBY/ONPlay Mode button 26, 30, 31 Infrared signal-emitting windowTV/VIDEO Cancel button 18 Disc Select buttonDisc number indicator Disc indicatorsFunction indicators Active functions light up Display windowOperational Principles On-screen displaysOpening displays Preference displaysTo prevent the monitor from burning out Screen Saver Play mode displaysStatus displays How to use numeric buttons On-screen guide iconsAbout invalid operation icon To select a track/title numberAbout discs Playable disc typesDisc structure Playable discsGetting started ConnectionsBefore making any connections To connect to a TVHow to make the unit feed the RGB signals To connect to a TV with the Scart connectorDisplay window Unit To connect to an audio amplifier or receiverRed White Audio cable not supplied Amplifier or receiver To connect the power cord To connect to audio equipment with a digital inputUsing the remote control unit To install batteries in the remote control unitPrecautions for the safe use of batteries PrecautionTo use the remote control unit for TV operation Setting the remote control signal for operating your TVYou can operate your TV from the remote control unit Manufacturer code listGetting started Basic operations Turning on/off the unitInserting and removing discs Place the disc in the trayBasic playback To start playbackTo stop playback completely To stop playback temporarilyResuming playback To advance or reverse playback rapidly while monitoringTo locate the beginning of the scene or song To memorize the interrupted positionTo resume playback Advanced operations To locate a desired scene from the DVD menuPress Title or Menu ExampleTo locate a desired selection using 4 or ¢ Use the numeric buttons to specify the numberPress Play Mode Press EnterAppears under MenuWhen you make a mistake To locate a desired scene from the display DigestUse the numeric buttons 0 to 9 to enter the time Press DigestSpecial picture playback Use Cursor 5/∞/2/3 to select the desired scenePress and hold 8 for more than 1 second Unit starts playback from the selected sceneTo playback in slow-motion Slow To zoom a scene ZoomPress 8, then use 1 / ¡ Press ZoomChanging the playback order To playback in the desired order ProgramRepeat playback To playback in random order RandomUse Cursor 2/3 to move to REPEAT, then press Enter To stop/quit random playback in the middleDuring Audio CD/Video CD playback To repeat a desired part A-B RepeatTo quit repeat playback To select a scene angle from the normal screen Angle Press AngleUse Angle or Cursor 2/3 to select the desired angle To quit A-B repeat playbackTo select a scene angle from the angle list display Angle Changing the language and soundTo select the subtitle language Subtitle To change the audio language or sound Audio Press AudioUse Audio or Cursor 2/3 to select the desired audio For Video CDSelecting the picture character Enjoying virtual surround soundTo select the picture character To simulate surround sound 3D PhonicChecking the status To check the disc/time informationFor Audio CD or Video CD playing without PBC For Video CD playing with PBCTo dim, the brightness of the display window To check the DVD function statusDimming the brightness of the display window Press DisplayInitial settings How to set preferencesSelecting preferences LanguageAudio Display Default setting DVD1 SystemYou can select the resume Function to be on or off. SeeTo set Parental Lock for the first time Limiting playback by childrenMoves to Exit To change the settings Parental Lock Points PasswordScreen display appears On the TV screenEnter your 4-digit password using the numeric buttons 0 to Moves to Password field When selecting noUse the Cursor 5/∞ to move to YES, then press Enter Press OPEN/CLOSEAdditional information Care and handling of discsTroubleshooting Symptom Possible case RemedySpecifications Appendix ATable of languages and their abbreviationsAppendix BCountry code list for parental lock Above ALL