JVC DR-M100S manual Plug & Play Set, Auto Clock Set/Auto Tuner Set, Information

Page 17

 

 

 

INITIAL SETTINGS EN 17

 

 

 

 

 

 

Plug & Play Set

1 Connect the antenna cable to the unit. (A pg. 16) Then connect

 

 

the AC power cord to an AC outlet. Do not turn on the unit. The

 

 

 

clock and tuner channels will be set automatically.

Auto Clock Set/Auto Tuner Set

● ALOADINGB blinks on the front display panel when the AC plug

 

 

 

 

 

 

of the power cord is connected into an AC outlet and it takes

This unit sets the clock and tuner channels automatically when AC

approximately 30 seconds for the unit to be turned on. This is

power cord is first connected to an AC outlet. The antenna cable

not a malfunction.

must be connected for the Plug & Play setting.

NOTES:

The time and date are set automatically by the clock setting data

● Auto Clock Set is performed first. AAUTOB blinks on the front

transmitted from one of the regular TV broadcast channels. We call

display panel during Auto Clock Set.

this TV channel the “host channel” and it is a PBS channel in your

● Auto Channel Set is performed next. Auto Channel Set scans all

area.

the channels that are receivable by your unit. During Auto

 

 

 

ATTENTION:

Channel Set, the channel numbers are displayed as they are

Depending on areas or reception conditions, the unit may not

scanned and set.

● When Plug & Play setting has been completed successfully, the

receive the Auto clock setting data from the PBS channel. If this

correct clock time is displayed. If you perform Plug & Play setting

function is taking a considerable amount of time, it may be

successfully, there is no need to perform ACLOCK SETB

necessary to perform the Semiauto or Manual Clock Set

(A pg. 19) and ATUNER SETB (A pg. 20). If, however, you want

procedure.

to add or delete channels, refer to AMANUAL CH SETB

 

 

 

 

 

 

 

 

 

(A pg. 20).

 

 

 

During Auto Clock Set

 

 

 

AAUTOB blinks.

CH+

STANDBY/ON

PUSH-OPEN

CH-

During Auto Channel Set

The channel numbers are displayed and AAUTOB blinks as they are scanned and set.

INFORMATION

●If AAUTO CLOCKB is set to AONB (A pg. 19) the clock will be adjusted automatically by the host channel using the incoming PBS channel clock setting data. (This automatic clock adjustment can only be performed when the unit is turned off.)

●If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Plug & Play will be performed when power is restored to the unit.

What to do if Plug & Play setting failed

●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform “Semiauto Clock Set” (A pg. 19) or “Manual Clock Set” (A pg. 19).

●If A- - : - -Bappears on the front display panel, your antenna cable may not be connected to the unit or there may not be a Host PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the unit; the Plug & Play setting will be automatically reactivated. If Plug & Play setting is not performed though the antenna cable is connected correctly, perform “Manual Clock Set” (A pg. 19) and “Auto Channel Set” (A pg. 20) or “Manual Channel Set” (A pg. 20).

Plug & Play Completed

The current time is displayed.

●If an incorrect clock time or A- - : - -Bappears on the front display panel, see “What to do if Plug & Play setting failed” on the left column.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents For Customer Use DR-M100SDear Customer Safety FirstInstallation Servicing Before YOU Install Your NEW UnitUSE Do not place the unit Declaration of ConformityAvoid violent shocks to the unit during transport Moisture CondensationContents DVD-R/RW Discs About DiscsBefore finalizing After finalizingRegion Number Discs For Playback OnlyUnplayable Discs File Structure Of Discs Recording Medium And FormatDVD-RAM DVD-RSingle-sided discs DVD Video MarksCare And Handling Of Discs Maintenance of discsLabel side Recording sideRear View Front ViewChannel Buttons CH + Video OUT Y/P B/P RDisc Front Display PanelRemote Control On-Screen Display Simple Connections Basic ConnectionInformation Plug & Play SetAuto Clock Set/Auto Tuner Set Language SET UPMenu/Audio/Subtitle Language Set EnterClock Set Enter SET UPSemiauto Clock Set Manual Clock SetTuner Set Enter Return SET UPAuto Channel Set To add channels Press selection keys toPress selection keys to select Amonitor TYPEB, then press Monitor SetPan&Scan/Letter Box Pan&ScanBasic Playback Variable Speed Search Playback FeaturesStill Picture/Frame-By-Frame Playback TOP Menu SlowSlow Motion Resume FunctionSkip Search One Touch ReplayChecking The Time Information Angle SelectionSubtitle Selection DVD-RAM/DVD-R/DVD-RWAudio Language/Sound Selection Menu Return Audio SET UPAudio Channel Selection Playback Control PBC FunctionRecording screen Live Memory PlaybackLive Check Playback and Live Check screenSimultaneous Recording and Playback Live Memory PlaybackTo watch from the recording start point NavigationNavigation Buttons To Be Used During Live Memory PlaybackLive Check How To Access The On-screen Bar Using The On-screen BarCancel Navigation Basic Operation On The On-screen BarDVD-RAM/RW/R Locating The Beginning Of a Desired SelectionSetting The Progressive Mode Adjusting The Picture QualityCancel Enter Time SearchRandom Playback Select The Switching Interval Of The Slide ShowProgram Playback While stoppedEnter REC Mode Recording ModeBasic Recording CH +Instant Timer Recording ITR Recording FeaturesElapsed Recording Time And Disc Remaining Time Indication Display RemainWhen the channel is changed on the unit Select AFR Justb in a recording mode selection procedureFree Rate Function Second Audio RecordingEnter Return CancelPress VCR Plus+ to Press the number keysProg Manual Timer ProgrammingCable Box or DBS Receiver Users Press selection keys to ProgDVD a Prog On-Disc Timer ProgrammingTo Make The Disc For On-Disc Timer Programming Disc How Discs Are OverwrittenREC Link When Programs Overlap Each OtherDVD a Cancel REC Link Press REC LinkAbout registration of information Library Database NavigationIcons and their meanings Limitations of registrationPlay Back Title Protect Title DVD-RAM & DVD-RW VR mode onlyDelete Title Memo NavigationTo modify the points Modify Index Edit Original InformationModify Title Name Modify CategoryPlay Back Play List Basic Operation Of Play List InformationCreate Play List Play ListModify Play List Name Edit Play List InformationPress Navigation to Delete Scenes Move ScenesYou wish to add a scene, then press G Add scenesPress selection keys to select AEDITINGB, then press Enter Select Aadd ScenebScan For Title From Library Edit Library InformationRegister Disc Delete InformationPress Navigation Locating The Desired Group And TracksPress selection keys to select AMP3B or AJPEGB, then press After all the files are played backDV Dubbing Sound monitor switchDV dubbing controller Auto capture buttonEdit From a Camcorder If the camcorder has no S-VIDEO output connectorIf the camcorder has an S-VIDEO output connector When using your unit as the recording deck When using your unit as the source playerExample Dubbing to an MD Digital Audio DubbingRemote Control 1/2/3/4 Code Switching Remote Control FunctionsPress selection keys to select 2ND Audio RECORD, then press Mode SetEnter SET UP Audio To use the S-VIDEO input connector To use the Video input connectorTo use the S-VIDEO Input input connector For details, refer to Monitor Set a pgInterlaced scan Scan Mode SetProgressive scan Progressive ScanChild Lock Tray LockTo lock tray To unlock trayGuide Channel Number Changing VCR Plus+ SettingGuide Channel Number Set Format a DVD-RW Disc Format a DiscFormat a DVD-RAM Disc After finalizing For DVD-R/RW Video mode discs Cancel The Finalization Of a DVD-RW DiscFinalize a Disc Finalize a DVD-R/RW DiscInitializing PlaybackGeneral RecordingOther Problems Timer RecordingAn invalid PlusCode number has been input Timer recording has finished during Live Memory playbackDuring Live Memory playback, o has been pressed. a pg Language Code List Power consumption Power requirementTemperature Dimensions WxHxDAudio Language/Sound Selection Select The Switching Interval Of The Slide ShowElapsed Recording Time Indication Playback Control PBC FunctionWarranty Only in U.S.A. EN DR-M100S
Top Page Image Contents