Getting started
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
•Do not connect the AC power cord until all other connections have been made.
•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.)
The unit
DIGITAL OUT |
| VIDEO OUT |
|
| |
PCM/STREAM |
| COMPONENT |
|
| |
COAXIAL | Y |
| PB | PR | AV COMPU LINK |
OPTICAL |
|
|
|
|
|
VIDEO | R | L |
| ||
AUDIO OUT |
| ||||
|
|
|
|
Yellow | White |
| Red |
Audio/video cable (supplied)
*If the TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function See “AV COMPU LINK remote control system” on page 41 for details.
(supplied)
TV
IN
Yellow VIDEO
White | LEFT |
AUDIO | |
| RIGHT |
Red
Getting | started |
|
|
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.
•If your TV has an
NOTES
•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a
•Connect the unit to an NTSC television. Do not connect the unit to a PAL television.
12