Basic operations
| 0 |
| 4 ¢ 7 3 8 |
| Numeric buttons |
4 | ¢ |
7 | 8 |
1 | ¡ |
3 | |
| |
Basic operations |
|
To resume playback
When the resume mode is “ON”
While the disc you interrupted playback is still on the disc tray, press 3.
The unit resumes playback from the position where playback was interrupted. The TV screen shows [RESUME PLAY].
To play back from the beginning
Press 7 before pressing 3 to start playback.
When the resume mode is “DISC RESUME”
1 Press 0 to insert a disc for which the unit has stored an interrupted position.
The TV screen shows [RESUME STOP].
Various speed playback
To advance or reverse playback rapidly while monitoring
During playback, press ¡ or 1 on the remote control unit.
You can select from 1.5 times, 5 times, 20 times and 60 times normal speed. Pressing 3 returns the unit to normal playback.
During playback, hold down ¢ or 4.
Playback is advanced or reversed at 5 times normal speed.
NOTE
During rapid playback, the sound will be muted except when playing an Audio CD, and when playing a DVD VIDEO or Video CD at 1.5 times normal speed. For Audio CD discs, the sound will be heard intermittently.
x1.5 Quick Playback with sound
When you select 1.5 times normal speed playback, the disc is played back with sound.
•For DVD VIDEO discs, the subtitle does not go off.
•If the sound of a DVD VIDEO disc is recorded in Dolby Digital or DTS format, stereo linear PCM signals are output. With some DVD VIDEO discs, the sound quality and volume may alter, or the sound may be out of tune.
•To switch from rapid reverse playback to x1.5 Quick Playback, first press 3, then press ¡ once.
•When the KARAOKE function is turned on, no sound will be heard during x 1.5 Quick Playback. Also, note that you cannot change the KARAOKE function settings during x 1.5 Quick Playback, though the input signal from the MIC jack(s) is output from the unit.
2 Press 3.
The TV screen shows [RESUME PLAY] and the unit resumes playback from the position where playback was interrupted.
To play back from the beginning
After inserting the disc, press 7 before pressing 3 to start playback.
NOTES
•If you change the [RESUME] setting from [DISC RESUME] to [OFF] or [ON], you cannot resume playback of a disc whose “resuming” position is stored. However, when you again set [RESUME] to [DISC RESUME], you will then be able to resume playback of the disc.
•If you interrupt the playback of a disc for which an interrupted position has already been stored, the memory will be updated with the new interrupted position.
•For a
•When the unit memorizes an interrupted point for a disc, it also memorizes Audio, Subtitle and Angle settings.
•The unit may not resume playback exactly from the interrupted point. In the case of an SVCD/Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than the point where playback was interrupted.
To advance a still picture frame by frame
While paused, press 8.
Each time you press 8, the still picture advances to the next frame.
Pressing 3 returns to normal playback.
12