JVC XV-N316S, XV-N315B, XV-N210B manual Audio menu, Others menu

Page 29

BACKGROUND

You can change and set the opening display to your favorite image using this menu.

Setting options

STANDARD, USER, SAVE AS BACKGROUND [STANDARD]: select when you use the JVC original image as

the opening display (initial setting).

[USER]: select when you use your favorite image as the opening display. This item will be taken effect after you register a new image in the next item.

[SAVE AS BACKGROUND]: select when you register a new image. To register a new image, see “Changing the picture of the opening display” on page 24.

AUDIO menu

DIGITAL AUDIO OUTPUT

To connect the player’s digital output to an external device equipped with a digital input, this item must be set correctly. See “Appendix C: Digital output signal chart” on page 34 for details about the relation between the setting and output signals.

Setting options

PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM

[PCM ONLY]: select when you connect the DIGITAL OUT jack of the player to the linear PCM digital input of other audio equipment.

[DOLBY DIGITAL/PCM]: select when you connect the digital input of a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder.

When this option is selected, playing back a disc recorded by the MPEG Multichannel format outputs a linear PCM digital signal.

[STREAM/PCM]: select when you connect the digital input of an amplifier with a built-in DTS, MPEG Multichannel or Dolby Digital decoder, or the stand-alone unit of such a decoder.

•With some DVD VIDEO discs that are not fully copy-protected, a 20 or 24 bit digital signal may be output.

•When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.

ANALOG DOWN MIX

To correctly play the audio on a DVD VIDEO disc recorded with surround multichannel audio, you must set this item properly according to your audio system configuration.

Setting options

DOLBY SURROUND, STEREO

[DOLBY SURROUND]: select when listening to multichannel surround audio with the player’s analog AUDIO OUT terminals connected to a surround decoder.

[STEREO]: select when listening to conventional two-channel stereo audio with the player’s AUDIO OUT terminals connected to a stereo amplifier/receiver or television set, or in case you want to record the audio from a DVD VIDEO disc to MiniDisc, cassette, etc.

D. RANGE CONTROL

This setting provides optimal audio quality from the analog AUDIO OUT terminals for listening to DVD VIDEO discs recorded in Dolby Digital format, at low or middle volume.

Setting options

WIDE RANGE, NORMAL, TV MODE

[WIDE RANGE]: when selected, audio is played back with the widest dynamic range so that you can enjoy powerful playback sound.

[NORMAL]: normally, select this option.

[TV MODE]: select if DVD VIDEO disc sound level is lower than TV program sound level. Thus you can hear sound at a lower volume clearly.

OUTPUT LEVEL

This setting allows you to attenuate the level of the signal output from the player’s analog AUDIO OUT terminals.

Setting options

STANDARD, LOW

• If the sound output from the speaker is distorted, select [LOW].

OTHERS menu

For the XV-N315B/XV-N316S, available items on the OTHERS menu differ from those of the XV-N310B/XV-N312S/XV-N210B/ XV-N212S. Refer to the separate sheet for additional information.

RESUME

You can select the resume playback mode.

See page 11 for details about the resume playback function.

Setting options

ON, OFF, DISC RESUME

[ON]: when selected, the player can resume playback of the disc from the position where playback was last interrupted, if the disc is still in the disc tray.

[OFF]: when selected, the resume function is deactivated.

[DISC RESUME]: when selected, the player can resume playback of the last 30 discs played. The player retains a memory of the interrupted positions of the last 30 discs played, even though they have been removed from the disc tray.

ON SCREEN GUIDE

The player can display “on-screen guide” icons or characters on the picture, which show what is happening to the disc or the player.

Example of “on-screen guide” icons: , ,

Setting options

ON, OFF

[ON]: when selected, the on-screen guide is activated.

AUTO STANDBY

When the player is stopped for more than 30 minutes or 60 minutes, the player enters standby mode automatically.

Setting options

60, 30, OFF

PARENTAL LOCK

 

settings

 

 

When this option is selected, pressing ENTER on the remote

 

control unit brings up the PARENTAL LOCK display shown below.

initial

This allows you to restrict children from playing DVD VIDEO

 

discs.

 

the

 

 

PARENTAL LOCK

 

Changing

COUNTRY CODE

GB

 

SET LEVEL

NONE

 

PASSWORD

_ _ _ _

 

EXIT

 

 

SELECT

USE 5∞ TO SELECT, USE ENTER TO CONFIRM

 

 

TO EXIT, PRESS SETUP.

 

• See page 28 for details about the parental lock setting.

To change the setting, see “How to set preferences” on page 25.

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Player’s region code is printed on the rear of the player Audio/Video files playback Changing the initial settingsRegion code of DVD Video Important for Laser Products Table of contents Supplied accessoriesPrecautions About this manualAbout discs Before operationNames of parts and controls Remote control unitFront panel Display windowConnecting to a TV with the Scart connector Connecting to a TVPreparations ConnectionsWhite Red Connecting to a TV having composite video input jackPicture Source About the scanning modeProgressive scan video playback available Connecting to a stereo audio amplifier/receiver Connecting to a digital audio deviceRed Only for XV-N310B/XV-N312S/XV-N315B/XV-N316S Digital equipmentConnecting the power cord Using the remote control unitTo install battery Precautions of the safe use of batteryTurning the player on and off Initial setupBasic playback If a menu is shown on the TV screen Starting playbackRestarting playback after stopping resuming playback Playback at various speeds Various kinds PlaybackLocating the beginning of a scene or song Using the numeric buttonsPlaying from a specific position Locating a desired scene from the DVD menuSpecifying a desired title Changing the playback orderTitle or track Time search To play back in a specific order Program playTo play back in random order Random play To repeat a desired part A-B repeat playback Repeat playbackTo quit repeat playback To quit A-B repeat playbackTo select a scene angle of DVD Video Angle Changing the language, sound and scene angleTo change the audio language or sound Audio Special picture and sound effects To adjust the picture character VFPTo zoom in pictures To return to the normal playbackMenu bar functions Basic operation procedureTo change sound field Sound Effect To bring up the menu barMenu bar functions for SVCD/Video CD/ Audio CD Menu bar functions for DVD VideoAudio/Video files playback PrecautionsOutline About files and folders groups on the discDirect selection for Jpeg files Basic operationsPlaying back in random order Random play Slide show playbackChanging the picture of the opening display How to set preferences Changing the initial settingsSelecting preferences About the Preference displayPicture menu Language menuENGLISH, FRENCH, German AUTO, FILM, VIDEONORMAL, VideoactiveOthers menu Audio menuTo set Parental Lock for the first time Limiting playback by childrenStop mode, bring up the Others menu Press 5/ ∞ to move To select Parental Lock then press EnterTo temporarily release the Parental Lock To change the settingsPress 5/∞ to move To select Parental Lock and press Enter To change the Country Code or SETAdditional information TroubleshootingSpecifications For Appendix a Country/Area code list for Parental LockFor pages 17 Appendix B Table of languages and their abbreviationsOutput Disc type Appendix C Digital output signal chartAppendix D Glossary Victor Company of JAPAN, Limited Above ALL
Top Page Image Contents