Panamax 7500-PRO Setdelay bank ondelay offdelayCR, Ondelay = 0-240 seconds, $Invalidparametercr

Command String

Action

Response

1.6

!SET_BRIGHT x<CR>

Sets the voltmeter, ammeter and LED

If x is valid, $BRIGHTNESS = x<CR>

x = {10 -100}

brightness to x%

If x is invalid, $INVALID_PARAMETER<CR>

Example: !SETBRIGHT 75<CR>

(sets meter brightness to 75%)

1.7

!SET_TRIGGER bank triggersource<CR>

Assigns the trigger(s) for an outlet bank

If bank and triggersource are valid,

bank = { 1, 2, 3, 4,HC1, HC2, TRIGOUT}

or DC trigger output. These trigger set-

$TRIGGER FOR bank = triggersource<CR>

tings are only used with the unit isset in

triggersource = { NONE, BUTTON, TRIGIN}

CUSTOM SETTING mode. See Page 4 for

If bank or triggersource are invalid,

more information.

$INVALID_PARAMETER<CR>

where

NONE = Outlet bank is always ON,

trigger output is OFF (RS232 only)

BUTTON = Trigger on front panel button.

TRIGIN = Trigger on DC input trigger

Example: !SET_TRIGGER 3 TRIGIN<CR>

(sets bank 3 to be controlled by the DC

trigger input only)

1.8

!SET_DELAY bank ondelay offdelay<CR>

Assigns the turn on and turn off delays for

If bank, ondelay and offdelay are valid,

bank = { 1, 2, 3, 4,HC1, HC2, TRIGOUT}

an outlet bank or DC trigger output. These

$DELAY FOR bank = ondelay offdelay<CR>

ondelay = { 0-240 } (seconds)

delay settings are only used with the unit is

set in CUSTOM SETTINGS mode. See Page

If bank, ondelay or offdelay are invalid,

offdelay = { 0-240 } (seconds)

4 for more information

$INVALID_PARAMETER<CR>

Example: !SET_DELAY 4 5 1<CR>

(sets bank 4 turn-on delay to 5 sec. and

turn-off delay to 1 sec.)

10

USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901