Pico Macom PFAM860SAW operation manual PLM860SAW

Page 3

PLM860SAW Manual.qxd 7/31/03 2:27 PM Page 3

Safeguards

PLM860SAW

11.Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appli- ance dealer or local power company.

12.Power-cord Protection: Power-supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords and plugs, conven- ience receptacles, and the point where they exit from the appliance.

13.Lightning: For added protection for this product during a lightning storm, or when it is left unattended or unused for long periods of time, the unit should be disconnected from power source.

14.Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power cir- cuits, where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal.

15.Overloading: Do not overload wall outlets and extension cords as this can result in risk of fire or electric shock.

16.Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

17.Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18.Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the fol- lowing conditions:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the oper- ating instruction. Adjust only those controls that are covered by the operating instructions. An improper adjustment may result in damage and will often require extensive work by a qualified tech- nician to restore the product to its normal operation.

e.If the product has been dropped or the cabinet has been damaged.

f.When the product exhibits a distinct change in performance— this indicates a need for service.

19.Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock or other hazards.

20.Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to deter- mine that the product is in proper operating conditions.

21.Outdoor Antenna Grounding: Before attempting to install this product, be sure the antenna or cable system is grounded so as to

provide some protection against voltage surges and built-up static charges.

a.Use No.10 AWG (5.3mm) copper, No.8 AWG (8.4mm) alu- minum, No.7 AWG (10mm) copper-clad steel or bronze wire or larger, as ground wire.

b.Secure antenna lead-in and ground wires to house with stand- off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m) apart.

c.Mount antenna discharge unit as close as possible to where lead-in enters house.

d.A driven rod may be used as the grounding electrode where other types of electrode systems do not exist. Refer to the National Electrical Code, ANSI/NFPA 70-1984 for information.

e.Use jumper wire not smaller than No.6 AWG (13.3mm) copper or equivalent, when a separate antenna grounding electrode is used.

NOTE TO THE CATV SYSTEM INSTALLER

THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S ATTENTION TO ARTICLE 820-22 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.

Ph: 800-421-6511 www.picomacom.com

3

Rev. 06/03

Image 3
Contents PLM860SAW Product Inspection Important Safety InstructionsPLM860SAW 860MHz Channelized-Agile PLL SAW-Filtered A/V Modulator PLM860SAWOperation Temperature Differential Gain Differential Phase Hum And NoisePhase Noise Power InputBack Panel Control Front Panel ControlSignal Combining Methods InstallationOur Return Policy Your Satisfaction Guaranteed Limited WarrantyFive-Year Limited Warranty Warranty Limitations

PFAM860SAW specifications

The Pico Macom PFAM860SAW is a versatile and high-performance RF amplifier designed primarily for use in applications requiring reliable, efficient, and robust signal amplification. The PFAM860SAW is particularly notable for its wide frequency range, making it suitable for various communication systems, including CATV, broadcast, and broadband networks.

One of the main features of this amplifier is its high linearity, which ensures minimal signal distortion and maintains signal integrity, even at higher power levels. This characteristic is essential for applications where clarity and quality of the transmitted signal are paramount. The PFAM860SAW achieves this through advanced design techniques and the careful selection of internal components.

Equipped with a gain control feature, the PFAM860SAW allows users to adjust the amplification level according to system requirements. This flexibility is crucial in environments where signal levels can fluctuate due to various factors such as distance, interference, or network load. Additionally, the amplifier has a low noise figure, enhancing its capability to amplify weak signals without introducing excessive noise, ultimately improving overall system performance.

The amplifier utilizes surface acoustic wave (SAW) technology, which contributes to its superior frequency response and enhanced stability across its operational range. SAW filters are known for their excellent selectivity and low insertion loss, making them ideal for maintaining the quality of signals while minimizing interference from unwanted frequencies.

Another characteristic worth noting is the PFAM860SAW's compact design. Pico Macom has engineered this product to occupy minimal space, making it suitable for integration into various RF systems without the need for extensive redesign. Its robust construction ensures durability and reliability over time, even in demanding environments.

Additionally, the PFAM860SAW features multiple input and output options, providing added versatility for different configurations. It supports various powering options, allowing for seamless integration into existing setups without significant modifications.

In summary, the Pico Macom PFAM860SAW is a state-of-the-art RF amplifier that excels in performance and adaptability. With its advanced technologies, including SAW filtering, high linearity, and gain control, it meets the needs of modern communication systems, making it a valuable component for engineers and system designers alike. Whether for residential or commercial applications, the PFAM860SAW stands out as a reliable choice for enhancing signal quality and ensuring efficient transmission.