![](/images/new-backgrounds/1157228/15722855x1.webp)
28EN
P![](/images/new-backgrounds/1157228/15722855xi27.webp)
LAYBACK![](/images/new-backgrounds/1157228/15722855xi29.webp)
![](/images/new-backgrounds/1157228/15722855xi30.webp)
AND![](/images/new-backgrounds/1157228/15722855xi32.webp)
RECORDING![](/images/new-backgrounds/1157228/15722855xi34.webp)
![](/images/new-backgrounds/1157228/15722855xi35.webp)
FEATURES
(cont.)![](/images/new-backgrounds/1157228/15722855xi38.webp)
![](/images/new-backgrounds/1157228/15722855xi39.webp)
![](/images/new-backgrounds/1157228/15722855xi40.webp)
Recording Features
1 2 3
4 5 6
7 8 9
TV/VCR
0
OSD
Record One Program While Watching Another
1 | ENGAGE TV MODE |
During recording... | |
● Press TV/VCR. The VCR's VCR indicator goes out. (If | |
you are using the RF connection (☞ pg. 6) to view | |
| the output from your VCR, the TV broadcast being |
| recorded disappears.) |
| ● If you are using the AV connection (☞ pg. 6), to view |
| the output from your VCR, change the TV's input |
| mode from AV to TV. |
SELECT CHANNEL FOR
VIEWING
2 Use the TV’s channel selector to set the channel you want to watch.
1 | 3 | Á |
¦ 7 8
Display Elapsed Recording Time
RESET COUNTER TO ZERO
1 Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.
DISPLAY ELAPSED TIME ON SCREEN
2 During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.
●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 20).
●The indications are not be recorded.