JVC HR-J642U On-Screen Timer Programming, Access Program SET, Information, EN Timer Recording

30ENTIMERRECORDING

On-Screen

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

2 2

q 5/8 6

MENU CH OK

		1	2		3
		4	5		6	NUMBER
		7	8	9		NUMBER "9"
			0
NUMBER		"8"				MENU
						OK
1		3			Á
¦	CH			8
		7

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 7 or 9).

1		LOAD A CASSETTE
		Make sure the record safety tab is intact. If not, cover
		the hole with adhesive tape, then load.
		● The VCR comes on, and the counter is reset,
		automatically.
		ACCESS ON-SCREEN
		MENU
2 Press MENU.
		ACCESS PROGRAM SET
3		SCREEN
		Make sure the highlight bar (arrow) is on "PROGRAM
		SET", then press OK.
		SELECT PROGRAM NUMBER
		Press the appropriate
				PROGRAM 1
		NUMBER keys or CH5°to
			START		– –:– – AM
4 select a vacant program
			DATE		– –/– –
		number, then press OK. The	STOP		– –:– – AM
		first time you set the timer
			CHANNEL		– – SP
		programming function, all
		the program numbers will	PRESS NUMBER KEY (O–9)
		be blank; in this case just	OR (5,°), THEN (OK)
			PRESS (MENU) TO END
		press OK when the Program
		Set screen appears.
		SET PROGRAM
5		INFORMATION
		Press the appropriate NUMBER keys to set the date,
	start/stop time and channel number. Press CH5° to set
	AM/PM and tape speed (SP or EP). Press OK after AM/
	PM, channel number and tape speed settings.

●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.

●It is possible to set all information using the CH5° button.

(In this case, press OK after each setting.) Do not use the CH ° button to set the date.

●At the Program Set screen, the setting that can be set blinks. When setting of a highlighted item is completed, the highlight bar moves down by 1 line to the next item.

NOTE:

If you are using a cable box or a DBS receiver, enter the cable box or DBS receiver channel, not the channel to be recorded. The channel to be recorded must be selected on the cable box or DBS receiver. (The cable box or DBS receiver channel is the VCR's channel that displays the channels received by the cable box or DBS receiver.)

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears. For weekly recording, the desired date for the day of the week must be entered.