JVC GD V500PZU SET UP for Input Signals, Adjusting unnatural video images 3D Y/C Filter

PICTURE Adjustments

SET UP for Input Signals

Item	Effect		Adjustments
PICTURE			Selects the proper brightness and
			density for the room.
	Less	More
BRIGHTNESS			Adjusts for easier viewing of dark pictures
			such as night scenes and black hair.
	Darker	Brighter
COLOR			Adjusts slightly to a lighter color.
	Less	More
TINT			Adjust for nice skin color.
(NTSC only)	Reddish	Greenish

Notes:

(1) “COLOR” , “TINT” and “SHARPNESS”

settings cannot be adjusted for “RGB”

and “PC” input signal modes.

(2) You can change the level of each

function (CONTRAST, BRIGHTNESS,

COLOR, TINT, SHARPNESS) for

each PICTURE menu.

(3) The setting details for normal,

dynamic and cinema respectively are

memorized separately for each input

mode (VIDEO, COMPONENT, RGB

and PC).

COMPONENT/RGB IN SELECT

Select to match the signals from the source connected to the COMPONENT/RGB input terminals.

Y, PB, PR signals “COMPONENT”

R, G, B, HD, VD signals “RGB”

1
	SET UP

Press to display the SET UP menu screen.

SHARPNESS	Displays a sharp image.
Less	More

Note:

(4) The “TINT” setting can be adjusted for

NTSC signal only.

INPUT

SURROUND

2	Press to select the “COMPONENT/RGB IN
	SELECT”.

Press to select the desired mode.

There is little change when PICTURE is increased with a bright picture or reduced with a dark picture.

ADVANCED SETTINGS

Item	Effect	Details
BLACK		Adjusts the dark shades of the image in gradation.
EXTENSION
	More
Less
W/B HIGH R		Adjusts the white balance for light red areas.
Less	More
W/B HIGH B		Adjusts the white balance for light blue areas.
Less	More
W/B LOW R		Adjusts the white balance for dark red areas.
Less	More

		VOL
N		R
PICTURE	SOUND	SET UP
PICTURE
POS. /SIZE		ASPECT

SET UP
COMPONENT/RGB-IN SELECT
	RGB
	SIGNAL
OSD LANGUAGE	ENGLISH (US)
	RETURN
SELECT
COMPONENT	RGB	18

R

Press to exit from adjust mode.

Adjusting unnatural video images (3D Y/C FILTER)

W/B LOW B	Adjusts the white balance for dark blue areas.
Less	More
GAMMA	2.0	2.2	2.5
Down	Up

Notes:

(1) Carry out “W/B” adjustment as follows.

AAdjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings.

BAdjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings.

CRepeat steps A and B to adjust.

Steps A and B affect each other’s settings, so repeat each step in turn to make the adjustment.

Select the SIGNAL from the “SET UP” menu during VIDEO (S-VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “3D Y/C FILTER (NTSC)”

Press to set ON/OFF.

SET UP
COMPONENT/RGB-IN SELECT
	RGB
	SIGNAL
OSD LANGUAGE	ENGLISH (US)
	RETURN
SELECT

Press (store) button

(2)The adjustment values are memorized separately for each input mode (VIDEO, COMPONENT, RGB and PC).

(3)The adjustment range values should be used as an adjustment reference.

Helpful Hint ( N / NORMALIZE Normalization)

While the “ADVANCED SETTINGS” menu is displayed, if either the N button on the remote control is pressed at any

time or the (ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

29

	SIGNAL	[ VIDEO ]
R	3D Y/C FILTER (NTSC)	ON
Press to exit from adjust mode.	COLOR SYSTEM	AUTO
	AUTO (4:3 )	NORMAL
	CHANGE	RETURN
	SELECT

30

GD-V500PZU