JVC GD V500PZU user service SET UP for Input Signals, Freq kHz /V-FREQ Hz

GD-V500PZU

SET UP for Input Signals

SET UP for Input Signals

COLOR SYSTEM / AUTO

Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.

Press to select each item.

SIGNAL [ COMPONENT ]

Select SIGNAL from the “SET UP” menu during VIDEO (S-VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “COLOR SYSTEM” or “AUTO”.

Press to select each functions.

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

SET UP
COMPONENT/RGB-IN SELECT
	RGB
	SIGNAL
OSD LANGUAGE	ENGLISH (US)
	RETURN
SELECT

Press (store) button

SIGNAL	[ VIDEO ]
3D Y/C FILTER (NTSC)	ON
COLOR SYSTEM	AUTO
AUTO (4:3 )	NORMAL
CHANGE	RETURN
SELECT

Press to adjust.

The following operation methods are the same for both the SIGNAL [RGB] and SIGNAL [PC].

SYNC

Setting RGB sync signal setting:

CLAMP POSITION
SIGNAL		[ RGB ]
SYNC		H & V
PULL-IN RANGE		NARROW
CLAMP POSITION
H-FREQ.	31.5	kHz
V-FREQ.	60.0	Hz

SIGNAL		[ PC ]
SYNC		H & V
PULL-IN RANGE		NARROW
CLAMP POSITION
H-FREQ.	31.5	kHz
V-FREQ.	60.0	Hz

SYNC H & V

Mode			Function
Color system	Set the color system to match the input signal. If set to “AUTO”, the color system
	is determined automatically.
	AUTO	PAL	SECAM	M NTSC	NTSC
AUTO (4:3)	Set to “NORMAL” to view 4:3 images in an unchanged format when AUTO is

Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).

H&V:	The H and V sync signals are input from the HD/VD (BNC) connector.
ON G:	Uses a synchronized signal on the Video G signal, which is input

from the G (BNC) connector.

ON VIDEO: Compatible with the scart plug (Europe)

The composite video signal input from the VIDEO input terminal is used by dividing the sync signals.

SYNC	ON G
SYNC	ON VIDEO

19

selected. If you would like to view 4:3 images in “Just” format, set to “JUST”.

Setting PC sync signal setting:

Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT). H&V: The H and V sync signals are input from the HD/VD (BNC) connector.

ON G: Uses a synchronized signal on the Video G signal, which is input from the G (BNC) connector.

PULL IN RANGE

Sets the width for different frequencies.

(This setting is the same for both SIGNAL [RGB] and SIGNAL [PC].)

CLAMP POSITION

Adjusts the clamp position.

The following operation methods are the same for “SIGNAL” menu during COMPONENT, RGB and PC input signal mode.

Normally, these adjustments are set to appropriate levels and, therefore, do not need to be altered.

PULL IN RANGE	NARROW
PULL IN RANGE	WIDE

CLAMP POSITION

H-FREQ (kHz) /V-FREQ (Hz)

Displays the H (Horizontal) /V (Vertical) frequencies.	H-FREQ.		kHz
		31.5
This display is valid only for RGB input and PC input.	V-FREQ.		Hz
		60.0
Display range:
Horizontal 15.5 - 110 kHz
Vertical 48 - 120 Hz

3132