JVC LT-32X585, T-26X585, LT-26X575, LT-32X575 manual Initial Setup, Auto Tuner Setup, Channel Summary

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 23 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the MENU button π† To AUTO TUNER SETUP √® To operate

è To choose CABLE or AIR Press the OK button to start

AUTO TUNER SETUP

TUNER MODE	CABLE
PRESS OK TO START
SELECT OPERATE	MENU EXIT

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or set the channel label as you like or prevent any unauthorized viewers from watching any or all 181 channels.

	Press the MENU button
		CHANNEL SUMMARY
π†	To CHANNEL SUMMARY
è	To operate	CHNO.	SCAN ID	CHNO.	SCAN ID
		01		06	HBO
The Channel summary screen will now be displayed with		02	MTV	07		L
		03		08
the channels set to scan marked with an “√”. You can		04	A&E	09
delete channels from the scan by removing the “√”. If any		05	E!	10
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “√” next to the		SELECT OK OPERATE			MENU EXIT

channel number.

π†√® To the SCAN column

Press the OK button to include or delete from scan

Press the MENU button when finished

31