PICTURE menu
AUTO:
The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture, giving the best possible picture.
MIN:
The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN.
•The MIN setting is not suitable for high- quality pictures which contain very little noise.
MAX:
The level of DigiPure effect is set to the maximum. If you set the Super DigiPure function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX.
•The MAX setting is not suitable for low- quality pictures which contain a lot of noise.
OFF:
The Super DigiPure function is turned off.
PULL DOWN
The PULL DOWN function displays a cinema film picture more smoothly and naturally on the screen.
AUTO:
The television automatically recognises the type of signal and turns the function on and off.
ON:
This function is turned on.
OFF:
This function is turned off.
COLOUR MANAGEMENT
This TV supports the COLOUR MANAGEMENT function to ensure dull colours are compensated to produce natural hues.
The COLOUR MANAGEMENT function is on by default.
ON:
COLOUR MANAGEMENT function is turned on.
OFF:
COLOUR MANAGEMENT function is turned off.
•Set this function to ON under normal conditions.
PICTURE MANAGEMENT
The PICTURE MANAGEMENT function makes it easier to see the dark areas when a picture has many dark areas, and makes it easier to see the bright areas when a picture has many bright areas.
Normally use with this function on.
ON:
PICTURE MANAGEMENT function is turned on.
OFF:
PICTURE MANAGEMENT function is turned off.
COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
1Choose COLOUR SYSTEM. Then press the a or 3 button
The
>> COLOUR SYSTEM
ENGLISH
MAIN | SUB |
PAL | AUTO |
OK
27