JVC LT-Z32SX4B manual Displaying a computer screen, Connecting to the computer

Page 41

Displaying a computer screen

ENGLISH

This TV can be used as a computer screen.

Connecting to the computer

Use a D-SUB cable to connect the TV’s PC IN terminal to the computer’s analogue RGB output terminal.

If you want to listen to the sound from the computer, use an audio cable to connect the VIDEO-3 AUDIO L/R sound input terminal to the computer’s sound output terminal. When the sound from the computer is mono, connect to the VIDEO-3 AUDIO L terminal.

•Refer to the computer manual for a detailed explanation of the connections at the computer side.

•Ensure that the connectors are facing the correct way when connecting.

•After connecting the D-SUB cable, tighten the two screws to fix the connector in place.

Watching images from a computer

After starting the computer, press the 4or 6pbuttons to choose “PC”

You can listen to the sound when the sound from the computer is connected to the VIDEO-3 AUDIO L/R sound input terminal.

•When the sound from the computer is connected to VIDEO-3, by choosing external input VIDEO-3 the sound from the computer can be listened to, but the images from the computer cannot be seen.

Table of signals for each type of computer

Resolution	Vertical	Horizontal
	frequency	frequency
	(Hz)	(kHz)
640 ⋅ 480	60.0	31.5
(VGA)
1024 ⋅ 768	60.0	42.0
(XGA)

*Only the above formats are supported.

*Even with the above formats and at 60 Hz, some problems may be experienced depending on the quality of the synchronous signal. (Depending on the quality, some pictures may not be displayed properly.)

*Apple Macintosh* computers are not supported.

When a picture is not displayed

Check the computer’s refresh rate and set it to 60 Hz. Refer to the computer’s instruction manual.

Computers which cannot have their refresh rate set to 60 Hz cannot be used with this unit.

*Apple Macintosh is a registered trademark of Apple Computer, Inc.

40

Image 41

Contents LT-Z32SX4B LT-Z26SX4B LT-Z32SX4S LT-Z26SX4S English Distance recommendations Pixel defectsS.T. demonstration „ Cleaning the screenContents Installation Setting up your TVUsing the stand „ Tilt the TV up and down„ Cable holder Removing the terminal coversConnecting the aerial and video cassette recorder VCR Putting the batteries into the remote control Connecting the power cord to the AC outletInitial settings Setup tour Press the # button on the remote controlNow, setting up is complete. Please enjoy your new JVC TV TV buttons and functions Press the # standby button to turn the TV on or off Remote control buttons and functionsTurn the TV on or off from standby mode Devices Watch images from externalTo return to a TV channel To use the programme number PR 0 AVDisplay function Press the 7q buttons to adjust the volumePR List Channel number displayZoom function „ Choose the Zoom modeCinema Surround function Using the Freeze function„ Adjusting the visible area of the picture To cancel the Freeze function Using the Multi-picture functionPress the Xbutton Pictures multi„ Return function Return Plus function and Return function„ Return Plus Favourite channel function „ Setting the picture effect„ Favourite channel registration „ Calling the favourite channelPress the DVD control button to control your DVD player Set the PIP/TV/DVD switch to the DVD positionOperating a JVC brand DVD player Press B button to go into the List mode Using the List ModeTeletext function Basic operationReveal Sub-pageHold SizePress H Cancel button CancelIndex Press the G Index buttonPress the Hbutton to display the menu bar Using the TV’s menuUsing the TV’s menu Picture menu „ Super DigiPure Features„ Digital VNR „ Colour Management „ Pull Down„ Picture Management „ Colour SystemMain „ 43 Auto AspectSUB PALSound menu BBE Sleep Timer Features menuChannel Guard „ To set the Channel Guard function„ To view a locked TV channel Choose Favourite SETTING, then press the a or 3 button Favourite SettingAppearance Auto Shutoff Blue BackAuto Program SET UP menuEDIT/MANUAL Move„ Move „ Basic operationDelete Manual„ Delete To cancel the ID function„ ID „ InsertPress the green or red button to search for a TV channel „ ManualVIDEO-1 SETTING/VIDEO-3 Setting AI VolumeLanguage VideoTeletext Language Press the a button to complete the settingChoose Teletext LANGUAGE, then press the a or 3 button Press the 6 buttons to choose a groupTable of signals for each type of computer Connecting to the computerWhen a picture is not displayed Displaying a computer screen„ Connecting the PC Connecting external equipmentBefore connecting anything Additional preparationWithout terminal covers „ TV output from the OUT terminal „ Connecting headphones„ Connecting speakers/amplifier Oirt CH/CC numbers„ If you cannot turn on the TV Troubleshooting„ If you cannot turn off the TV „ No picture or no sound„ Poor sound „ If the TV does not respond to the remote control„ Other issues We may change the design and specifications without notice SpecificationsSpecifications Victor Company of Japan, Limited 0904MKH-CR-MT