JVC LT-47X788, LT-42X788, LT-42XM48, LT-37XM48 manual Optical Out, Quick Start-up

Initial Setup

Optical Out

You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL, you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects digital channels.

Press the MENU button

π† To "Initial Setup" √® To enter

π† To "Optical Out"

è To select "PCM" or "DOLBY DIGITAL" Press the MENU button when finished

Initial Setup					2/2
	Auto Shut Off
					Off
	Software Version
	Power Indicator				High
	Optical Out				PCM
	Quick Start-up				Off
			BACK		MENU
	Select	Operate		Back	Exit

Notes:

•If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select PCM, it cannot output the sound from the speakers.

•For connecting an amplifier using the optical output, see page 20.

•You cannot output sound from your Optical Output connection if the audio source is from your HDMI device.

Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories.

Quick Start-up

Quick Start-up allows you to lessen the time for the TV to turn on and ready for viewing.

Press the MENU button

	To "Initial Setup"	Initial Setup	2/2
π†
è	To enter
		Auto Shut Off	Off
π†	To "Quick Start-up"	Software Version
		Power Indicator	High
è	To turn "On" or "Off"
		Optical Out
			PCM
		Quick Start-up	Off

Press the MENU button when finished

Note:

•Standby power consumption is higher when you have this feature turned on.

		BACK	MENU
Select	Operate	Back	Exit

40